Content

  1. History of origin
  2. What are
  3. Areas of use
  4. Positive and negative qualities
  5. Principle of operation
  6. Removing liquid nails
  7. How to choose the right product
  8. Rating of the best liquid nails for 2020
  9. Conclusion

Rating of the best liquid nails for 2020

Rating of the best liquid nails for 2020

Liquid nails are analogous to construction glue. The main purpose is to speed up the process of gluing various surfaces and make it easier and more reliable. The best manufacturers fill the market with quality goods, both inexpensive and at a significant price. At present, the products are popular all over the world.

History of origin

There is an opinion that liquid nails first appeared in the 60s in the USA. The famous American company Masso decided to simplify the process of using conventional glue by packaging it in conventional cartridges. After a short time, a modern development appeared - Liquid nails, which became widespread in America. The goods entered the Russian market only in the 90s of the 20th century.

The new glue was made from synthetic rubber and polymer additives. The filler was a special high-density clay, which was mined in the state of Texas. Today, clay is almost universally replaced by chalk, making the product white, but the quality has suffered a bit.

At one time, they added to the composition:

  • acetone (promotes faster drying);
  • toluene (improves adhesion).

However, the presence of a high content of toxic elements in them forced to reconsider the issue of their further use. It should be borne in mind that budget options may contain such additives, which distinguishes them with an unpleasant odor. These products are not recommended for use in closed rooms.

What are

Products differ in the type of solvent. The scope of its application depends on this. There are several types of liquid nails, the distinctive features of which are shown in the comparative table:

KindsDescription
NeopreneRubber-based (synthetic). Used for gluing heavy structures, including metal. They are not afraid of high humidity, temperature changes, too much frost. Set quickly and firmly. The disadvantages include insignificant toxicity and an unpleasant "aroma". You can work with them only with gloves and a mask, with open windows in the room. Expert advice - do not use with synthetic materials.
Water-based acrylicWater based. The advantages include the absence of odor and toxicity.Even popular models have a little “limp” strength, so they are used to bond lighter items, including porous surfaces. The negative characteristics include significant sensitivity to temperature extremes, insignificant moisture and frost resistance. The recommendations of the professionals are as follows: Avoid using in the kitchen, bathroom and open space.

Compositions are qualified for their intended purpose, in connection with which they are divided into:

  • special;
  • universal

Moreover, the latter option is widely used in various conditions for gluing any surfaces. There are options when special assembly glue with specific parameters is more suitable for the designated tasks. Compositions can be special and used exclusively for their intended purpose. On the shelves of specialty stores, you can find liquid nails for:

  1. Outdoor work.
  2. Internal works.
  3. Wet and dry rooms.
  4. Mirrors, ceramics and glasses.
  5. Expanded polystyrene and MDF panels.
  6. Fastening structures with significant weight.
  7. With the function of fast setting and increased strength.

Which product is better to buy depends on the conditions and volume of the manipulations performed. Full information regarding the scope of use is indicated by the manufacturer on the packaging.

Areas of use

For the most part, this product belongs to the category of universal (with rare exceptions), therefore it is suitable for manipulating the following materials:

  • Fiberboard;
  • MDF;
  • Chipboard;
  • ceramics;
  • mirrors;
  • glass;
  • plastic;
  • polystyrene;
  • drywall;
  • brick;
  • metal;
  • cork panels;
  • aluminum;
  • sinks, showers and baths;
  • siding;
  • window sashes;
  • door frames.

Often, the composition is used to seal cracks in walls, joints in corners, ventilation holes, countertops. The recommendations of experts boil down to the fact that even the most popular models that lead the rating of quality products should not be used for gluing aquariums and when working with damp wood.

Positive and negative qualities

There are many more advantages of the product than disadvantages. The advantages include:

  • Use not only for flat, but also for curved surfaces;
  • Elementary in use;
  • High strength;
  • Convenient packaging;
  • Adhesion to all kinds of materials;
  • They are not afraid of corrosion;
  • Maintain surface integrity;
  • They are mounted without noise, dirt and dust;
  • High speed of manipulation;
  • Lack of toxicity;
  • Excellent fire resistance, frost resistance;
  • Are not afraid of moisture;
  • The presence of a neutral odor;
  • Minimum consumption;
  • Environmental Safety;
  • Indoor and outdoor use is expected;
  • Even a beginner can handle;
  • No need to use expensive tools.

There are practically no drawbacks, with the exception of certain operating restrictions, as well as significant cost.

Principle of operation

There is nothing difficult in working with this product. You just need to purchase the appropriate composition and a special gun into which a cartridge with glue is inserted. In appearance, the gun resembles a syringe, but with large parameters. The tube is inserted into a special niche so that one side touches the tip, and the other - the surface for pressing. Cartridge installation and gun operation is straightforward.

Pistols are produced in two types:

  • leafy;
  • frame.

The latter are distinguished by their reliability and quality of fixation. Pistols are also available with and without reverse travel. For home, it is best to use a backstop design, for professional activities, in the presence of a large volume, it is better to use a device without backstop.

The gluing process is as follows:

  1. The surfaces are pre-cleaned and degreased.
  2. The glue is applied with a snake gun or pointwise.
  3. The materials are folded and firmly pressed, hold for an average of two minutes. After the hand can be removed.Mandatory control of horizontal and vertical levels.
  4. Final drying takes place after 12 - 24 hours, depending on many factors, such as composition, ambient temperature, humidity, room ventilation, and so on.

The presence of an organic solvent in the product assumes work with gloves and a mask to protect the respiratory tract.

Removing liquid nails

During the repair process, drops of glue can fall not only on the designated material, but also on the face, hands, clothes, and so on. The composition must be removed urgently. This requires a sponge or rag, soap, warm water, petroleum jelly, a scraper, vegetable oil and solvent. Let's consider this issue in more detail.

  • From clothes

The best option is to use Secunda antiglue. You can heat the fabric with an iron or hair dryer, and then cool it in the refrigerator. The glue loses its properties and detaches from the object. If the material is not afraid of acetone, then you can resort to its help. If it doesn't work the first time, you can try again. To avoid sticking the flap to the table, a blank sheet of paper is placed under it. The composition is removed with a toothbrush (unnecessary).

  • From materials

When the composition gets on a third-party surface, it is removed with a sponge soaked in water, white spirit or a soft spatula. When the glue is completely dry, only a hard spatula or blade, as well as fine sandpaper, will help. If necessary, separate the glass structures, they are heated to a temperature of 60 degrees.

  • From the skin

Acrylic nails can be easily removed from the skin with household or liquid soap. When using neoprene formulations, it is best to seek help from vegetable oil or petroleum jelly.

How to choose the right product

The selection criteria are individual and depend on the preferences of the master, experience and the amount of work performed. It is difficult to say which company is the best product. According to buyers, there are plenty of high-quality goods on store shelves, differing in functionality, average price, and place in the rating. The best ones are expensive. What to pay special attention to in order to avoid mistakes when choosing:

  1. Full hardening period. This indicator varies. When repairing walls and ceilings, it is better to choose a representative from the fast-setting and heavy-duty series.
  2. The quality of the composition. Pay attention to the presence of chalk, which significantly degrades the quality of the product. If you have to deal with heavy objects, then the presence of chalk is best avoided.
  3. Try not to purchase acetone glue.
  4. For ceramic tiles in your kitchen or bathroom, opt for a moisture resistant compound.

Where to buy, everyone is determined independently. You can visit specialized markets and conduct a review of the products offered, talk to a sales manager, learn about new products, see what it costs. There is an option to order liquid glue online in an online store, having previously read the reviews of experts.

Rating of the best liquid nails for 2020

Universal

Krass, 300 ml

The composition is beige. Ideal for gluing:

  • bricks;
  • metal;
  • plywood;
  • wood;
  • concrete;
  • stone;
  • gypsum;
  • PVC;
  • plaster;
  • ceramics.

Does not destroy the styrene-butadiene structure, it is convenient for mounting polystyrene materials. Provides the ability to adjust the position of glued parts. It is used exclusively on a clean, grease-free and dry surface. Shelf life is one year at temperatures from +5 to +25 degrees. Transportation is possible at minus temperatures of -15 degrees.

The average cost is 172 rubles.

liquid nails Krass, 300 ml
Advantages:
  • vibration resistance;
  • drying speed;
  • moisture resistance;
  • not afraid of chemical exposure;
  • resistant to atmospheric upheavals.
Disadvantages:
  • not identified.

Alfa Flex 91, 280 ml

Products can be used at temperatures from +10 to +30 degrees.Drying time - up to 15 minutes, color - beige. Universal plan: glues wood, glass, plasterboard, metal, concrete and other products. It is widely used for finishing and assembly seams, forming an elastic, durable layer.

The product is sold at a price of 172 rubles per unit.

liquid nails Alfa Flex 91, 280 ml
Advantages:
  • elasticity of the seam;
  • noteworthy adhesion;
  • suitable for almost all materials;
  • super strong;
  • convenient packing;
  • moisture resistance;
  • affordable cost;
  • sold at any specialized outlet;
  • operational grasping.
Disadvantages:
  • absent.

Bison Expert KM - 100

Russian brand, but produced in Poland. Possesses excellent adhesion characteristics. Effectively fills voids and holds the material firmly together. Resistant to moisture, low temperatures, ultraviolet radiation, mechanical damage. Suitable for all materials, including metal. Included in the TOP of high quality products. It is popular for professional editing.

The average price is 209 rubles per tube.

liquid nails Bison Expert KM - 100
Advantages:
  • anti-corrosion properties;
  • fast drying speed;
  • withstands significant loads;
  • a budget option;
  • ease of application.
Disadvantages:
  • you need to purchase a special pistol;
  • fakes with chalk come across, which negatively affects the strength.

Titebond Multi Purpose

A quality product is produced by an American company. The main feature is the mass of positive characteristics. Designed for universal use both outdoors and indoors. Quickly and efficiently glues metal, chipboard, concrete, MDF, tiles and other products. Half an hour is enough for a positive result. It has a light beige shade, optimal consistency.

The average cost is 240 rubles.

liquid nails Titebond Multi Purpose
Advantages:
  • frost resistance;
  • safety;
  • excellent adhesion;
  • drying speed;
  • moisture resistance;
  • anti-corrosion;
  • reliability;
  • a good combination of price and quality;
  • durability;
  • the convenience of use.
Disadvantages:
  • not installed.

"Moment" universal mounting

Russian-made products are especially popular among both professional builders and beginners. Quickly and efficiently glues polystyrene panels, concrete, fiberglass, bricks, wood and so on. Half an hour is enough for complete drying. Differs in high strength and resistance to temperature extremes.

Retailers offer glue at a price of 227 rubles.

liquid nails "Moment" universal mounting
Advantages:
  • optimal consumption;
  • elasticity;
  • strength;
  • wide range of applications;
  • water resistance;
  • convenient container;
  • used for uneven surfaces.
Disadvantages:
  • toxicity;
  • acrid smell.

For plastic

Henkel Makroflex MF 995

The Finnish manufacturer produces high quality and completely safe products. With a professional composition, you can work at a temperature of -10 degrees. In the manufacture, modern technologies were used that allow the use of glue for any known building materials. Even if irregularities are found, minimal mechanical fixation is required.

The average cost is 361 rubles.

liquid nails Henkel Makroflex MF 995
Advantages:
  • not afraid of moisture and freezing temperatures;
  • strength;
  • durability;
  • heat resistance;
  • versatility;
  • value for money.
Disadvantages:
  • not identified.

Point 98

The products of the Lithuanian company from synthetic rubber are used for any repair and installation work. Differs in instant grasping, despite the quality of the environment. The composition makes it possible to make a seam of special strength, while maintaining elasticity at the proper level. Does not spread, which allows you to quickly and efficiently lay out the walls with ceramic tiles, fix glass, PVC - panels and so on.

The average cost is 326 rubles per unit.

Liquid nails Point 98
Advantages:
  • frost and moisture resistance;
  • used at temperatures up to -20 degrees;
  • excellent durability;
  • significant separation resistance (4MPa);
  • versatility;
  • durability;
  • safety.
Disadvantages:
  • absent.

Kraftool KN - 915

Product of a German manufacturer of appropriate quality and reliability. It is mainly used for working with PVC products, although it belongs to the universal type. An excellent tool for renovations in the kitchen and bathroom. Bonds plastic, metal, wood and more. The main advantage is instant grasping.

The products are pleased with the price - only 220 rubles per unit.

liquid nails Kraftool KN - 915
Advantages:
  • safety;
  • ease of use;
  • the presence of an antiseptic in the composition;
  • frost resistance and moisture resistance;
  • better adhesion;
  • produced using unique technologies;
  • a good combination of price and quality.
Disadvantages:
  • not installed.

For tiles

Quelyd Mastifix

It is mainly used for interior decoration and improvement work. The French company pays great attention to product quality. An irreplaceable assistant for gluing tiles. Also copes with plastic window slopes and ceiling cornices. The main condition is that at least one of the materials to be glued must perfectly absorb moisture.

The average price is 272 rubles.

liquid nails Quelyd Mastifix
Advantages:
  • instant grasping;
  • reliable fixation;
  • perfect strength;
  • neutral smell;
  • economical consumption.
Disadvantages:
  • absent.

Tytan Ceramics and Stone

Polish-made products are distinguished by their safety and fixation speed. There is practically no smell, there are no solvents in the composition. The setting period is 5 seconds. Thanks to its optimal consistency and convenient packaging, the glue is quickly and efficiently applied to any surface, both vertical and horizontal. In addition to tiles, it copes well with baseboards, stone, plaster, ceramics and wood.

Retailers offer goods at a price of 250 rubles.

liquid nails Tytan Ceramic and Stone
Advantages:
  • perfect white shade;
  • to be painted after drying;
  • does not crack;
  • high adhesion;
  • Excellent value for money and quality;
  • lack of smell;
Disadvantages:
  • not identified.

Ceresit CB 100

High-quality German-made products are very popular among professional builders. It is widely used for both internal and external work. The main requirement is the complete absence of interaction with moisture. It is used for gluing materials with large surfaces, including artificial stone, wood, PVC.

The average price is 275 rubles.

liquid nails Ceresit CB 100
Advantages:
  • fast and reliable fixation;
  • does not require additional physical effort;
  • voids are filled with it;
  • effective;
  • long service life;
  • easy to use.
Disadvantages:
  • absent.

For wood

Krass Mirror

The Polish product is manufactured using modern technologies. In its manufacture, great attention is paid to safety and efficiency. Used both for indoor and outdoor use. Does not destroy amalgam, is resistant to temperature fluctuations, and guarantees a reliable coupling.

In specialized stores, they offer a composition for 199 rubles per unit.

liquid nails Krass Mirror
Advantages:
  • not afraid of moisture;
  • durability;
    adhesive layer power;
  • resistance to deformation;
  • irregularities are filled with it;
  • fixes decorative elements;
  • high breakaway resistance.
Disadvantages:
  • not installed.

Vermeister Quick Stop

The product is made in Italy. Mainly used for vertical surfaces. Differs in fast setting. The presence of a water base makes it completely safe for indoor use. A good option for working with wooden skirting boards, profiles, accessories, platbands, extensions, and so on.Substantial adhesion allows you to make a strong seam in a minimum time. The maximum time for complete drying is two days.

The average price is 475 rubles.

liquid nails Vermeister Quick Stop
Advantages:
  • lack of solvents, amine and epoxy compounds in the composition;
  • safety;
  • does not require room ventilation;
  • quick installation;
  • instant grasping;
  • high adhesion;
  • efficiency;
  • long service life.
Disadvantages:
  • use exclusively for internal work.
  • substantial cost.

Kudo KBK 301

An economical but high quality product for working with wooden surfaces, drywall, chipboard and fiberboard. Excellent adhesion performance. The water base does not contain toxic solvents, so the product is odorless. After complete drying, it is possible to paint.

The average cost is 170 rubles.

liquid nails Kudo KBK 301
Advantages:
  • low price;
  • easy to use;
  • reliable;
  • safe;
  • wide temperature range - from 60 to 80 degrees.
Disadvantages:
  • not used in rooms with high humidity.

For concrete and brick

Stayer Blackpro Extra FIX

The product is manufactured in Taiwan. It features powerful fixation, which makes it possible to glue various elements, both wooden and plastic, and also from decorative stone to a concrete wall. Installation of panels is carried out in any position and does not cause any particular difficulties. It can be used to install parts in a car salon or work with a body kit.

The average cost is 205 rubles.

liquid nails Stayer Blackpro Extra FIX
Advantages:
  • various colors;
  • use when decorating premises with any interior;
  • excellent contact with the surface;
  • hardens quickly;
  • not afraid of significant temperature changes;
  • moisture resistant;
  • the possibility of spot work due to excellent adhesion;
  • combination of price and quality;
  • durability;
  • reliability;
  • safety.
Disadvantages:
  • absent.

Ultima 309

The Malaysian company produces high quality products for fastening heavy structures. It has an enhanced effect, it is used for repairs both indoors and outdoors. Grabs instantly, without additional support. Installation of concrete and stone slabs is not particularly difficult. After complete drying, the seam is able to withstand any mechanical stress. The final hardening is in a day.

In retail outlets, you can buy products at a price of 204 rubles per tube.

Ultima liquid nails 309
Advantages:
  • moisture resistance;
  • resistance to detergents;
  • efficiency;
  • durability;
  • ease of use.
Disadvantages:
  • the presence of solvents in the composition requires careful ventilation of the room.

Masterteks

The Russian product is manufactured on the territory of the Celestial Empire. The seam turns out to be as strong as possible, in terms of strength it is not inferior to nails or screws. Withstands a weight of 110 kg per 1 sq.m. They are in great demand during the installation of large and heavy elements.

The average cost is 259 rubles.

liquid nails Masterteks
Advantages:
  • does not spread;
  • easy to apply;
  • powerful grip;
  • high-quality adhesion;
  • increased resistance to moisture and severe frosts;
  • suitable for both indoor and outdoor work.
Disadvantages:
  • not identified.

For stone

ProfiMaster, 0.528 g

Acrylic mounting glue. Suitable for stone, plaster, ceramics. White. Differs in fast setting. It is very popular among professionals whose work is related to decorative and finishing materials.

You can purchase it at a price of 207 rubles.

liquid nails ProfiMaster, 0.528 g
Advantages:
  • improved formula;
  • excellent adhesion;
  • fast setting;
  • excellent fixation;
  • the strength of the glue line;
  • does not allow the elements to slide;
  • used for external and internal work;
  • environmental Safety;
  • efficiency;
  • long warranty period;
  • long service life;
  • resistance to temperature extremes and strong humidity.
Disadvantages:
  • not installed.

Homakoll

The Russian product is used for external and internal work during construction. Suitable for bonding stone, PVC tiles - panels, glass, cork, parquet, expanded polystyrene, wooden structures, MDF and so on. Can only be used with absorbent substrates:

  • Chipboard;
  • wood;
  • gypsum plaster;
  • concrete;
  • moisture resistant plywood;
  • bricks;
  • DSP.

It is not recommended to keep the seam in water for a long time. The production is based on an aqueous dispersion of acrylic copolymers. Available in white only. It is applied to the surface using a special construction trowel with rectangular teeth 6 x 6 mm or 4 x 4 mm. Average consumption - from 300 to 1000 g / sq.m., Depending on the work surface and the used application tool.

Grabs after 20 minutes. It will take 72 hours to dry completely. If the original factory packaging is not damaged, it can be stored for up to one and a half years at temperatures from +5 to +30 degrees. Available in two different weights.

The product is sold at a price: for 1.5 kg - 399 rubles, for 4.5 kg - 1199 rubles.

Homakoll liquid nails
Advantages:
  • no hazardous substances are used in production;
  • can be transported at temperatures up to -20 degrees;
  • high strength;
  • substantial adhesion;
  • used when working on vertical and inclined surfaces;
  • you can correct the gluing within a few minutes;
  • environmental Safety;
  • does not contain organic solvents;
  • lack of smell;
  • frost resistance;
  • long service life;
  • reliability;
  • ease of use.
Disadvantages:
  • not recommended for use when working with Teflon, polypropylene, polyethylene and other similar materials.

HeavyDuty

A distinctive feature of the product is high strength and super strength. It is very popular for bonding metal surfaces, frozen wood, concrete, brick, hardboard, plywood, stone, chipboard, plaster, fiberglass, ceramics, slate and so on. The glue is applied to the surface in small dots, evenly, at a distance of about 5 - 10 cm.

The average cost is 215 rubles per package.

Liquid nails HeavyDuty
Advantages:
  • used for work both inside and outside buildings;
  • used for sealing centimeter seams and cracks;
  • quality of bonding;
  • anti-corrosion properties;
  • after complete drying, you can give the seam any shade using water-based dyes;
  • long service life;
  • ecological cleanliness;
  • safety;
  • efficiency;
  • reliability.
Disadvantages:
  • not installed.

Conclusion

Any professional builder will tell you that it is impossible to build a new structure or make repairs in the house in the absence of high quality, reliable and durable fasteners. There are many different options: nails, screws, and so on. But the process with such "helpers" is too laborious and time-consuming. Moreover, their use leads to additional loads on the surface and loss of attractiveness. Currently, liquid nails have found widespread use - a unique way to quickly and efficiently connect all kinds of materials.

Computers

Sport

beauty