Content

  1. Description of the device
  2. Features and working principle
  3. Applications of sandblasting devices
  4. Sandblasting expert advice
  5. How to choose a device
  6. Rating of the best sandblasting guns for 2020
  7. Conclusion

Rating of the best sandblasting guns for 2020

Rating of the best sandblasting guns for 2020

Those who are constantly faced with the need to clean metal surfaces know that this task can be solved in various ways. The most time consuming, time consuming and exhausting is the use of a hand tool. To minimize the time spent and improve the efficiency of actions, sandblasting devices are used.

Description of the device

These tools differ in characteristics and principle of operation. However, they contain identical structural elements:

  • compressor;
  • a gun with a nozzle;
  • tank for abrasive;
  • control device;
  • connecting hoses;
  • accumulative receiver.

The most important element is the compressor, which serves to build up the air flow pressure. They are divided into units of low power, medium power and significant power. The operation is controlled by automation, turning the device on and off, adjusting the pressure indicator.

The best and most expensive models are equipped with compressors and a special system that allows them to turn off in case of a breakdown, as well as in case of voltage surges.

The advantages of automation are as follows:

  1. Complete stop of the device in case the operator's hands let go of the nozzle.
  2. The ability to transfer the device to working and idling.
  3. Management of additional functions.
  4. When the sand level drops, it starts signaling.

What to look for when choosing a model? On the build quality and dimensions of hoses for air and sand, as well as for removing the abrasive component. The power of the device and performance, as well as the quality and duration of work, directly depend on these parameters.

Features and working principle

Sandblasting units are used to remove all kinds of dirt from surfaces. Manufacturers produce several types of installations, similar in principle of operation: thanks to compressed air, an abrasive agent or sand flies out of the nozzle at great speed, cutting into the dirt and effectively removing it. These devices are used to clean buildings, metal structures from rust, old paint, dust and dirt.

Sandblasting is divided into types, depending on the type of action and power. Thus, there is a division into the following devices:

KindsSpecifications
Low powerThe volume of the container does not exceed 30 liters.Scope of application - hard-to-reach places and when working at a significant height. Unable to function for a long time, it is necessary to regularly rest the device.
Medium powerCapacities from 50 to 140 liters. They are distinguished by the absence of a powerful compressor. They are used in medium and small industries.
High powerThe presence of a capacity of at least 20 liters. Used for significant volumes of work. This stationary device treats huge contaminated areas.

Based on the type of action, devices are:

  1. Pneumatic (pressure). They quickly and efficiently deal with heavy dirt or a thick layer of rust. We are ready to cope with any volume of work, thanks to which they are deservedly popular in large enterprises. A distinctive feature of these devices is as follows: compressed air is supplied not only to the installation, but also to the abrasive dispenser, which significantly increases the speed of the released air stream.
  2. Vacuum. The principle of operation is as follows: an abrasive substance is fed onto a contaminated substrate, immediately picked up by a vacuum and again thrown out onto a contaminated area. It can be used for certain activities involving possible damage to surfaces in the immediate vicinity.
  3. Injection. Distinctive feature: air and abrasive mixture are supplied through different hoses. The power of the unit is small, so the device is not able to cope with significant contamination in large areas. However, for delicate cleaning, this is the most acceptable option.

Sandblasting options

Thanks to such settings, it is possible to tidy up various types of surfaces using:

  1. Easy cleaning - removes minor rust and scale. The result is a clean base, but minor contamination may remain in hard-to-reach areas.
  2. Medium Cleaning - Provides more thorough measures to remove paint, dirt and rust. Bottom line: there are punctate areas covered with corrosion.
  3. Deep cleaning, providing perfect cleansing from all kinds of dirt. It is used in the event that the next stage of work is the application of paintwork.

Types of installations

Sandblasting machines are available in two types, the differences between which are indicated in the comparative table:

What areDescription
Open typeThey are used in open spaces: under awnings, outdoors, and so on. Inexpensive, mobile, with insignificant parameters. The main disadvantage is that a lot of dust appears during operation, there is no way to collect and reuse the abrasive mixture, too much sand leaves. It is quite dangerous to work with the tool, therefore the operator must wear full protective equipment.
Closed typeThey are used in a closed space - a special chamber with different dimensions: from a small box to a large room. The devices have significant power, with the circulation of the abrasive mixture, which allows it to be reused. It is widely used in the construction of large facilities and rarely at home. The application is safer. The main disadvantage is its considerable size, difficulties during transportation and the obligatory connection to ventilation systems.

Popular models can also be:

  1. Stationary. They are mounted in production workshops. Equipped with a built-in filtration system, connected to powerful ventilation systems, they are used to treat individual objects and parts, as well as minor surfaces.
  2. Mobile. As a rule, small-sized or home-made, made by yourself at home, using the step-by-step instructions on the Internet. They can handle tanks, large equipment, building facades and so on. They are moved to a specific place, depending on the need arisen.

Applications of sandblasting devices

The most common industry is body repair. This technique helps to quickly and effectively free the surface from old paint, rust, grease and other contaminants. Often the device is used when repairing discs: if the part is peeling, crumpled or damaged, then before proceeding with its restoration, first a high-quality cleaning is performed, and then painting.

What are the advantages of the sandblasting unit? The result of metal grinding with this tool is unique, which cannot be achieved in manual mode. This method removes even the most pitting elements of corrosion, "hidden" in pits, minor pores and microcracks, which minimizes the process of rusting of the metal base. Products cleaned in this way serve much longer and are less subject to corrosion. As for the surface, it turns out to be surprisingly smooth. When not scratched, primer and paint will perfectly cover the parts.

In addition to car repairs, the sandblasting device is widely used in:

  • furniture production;
  • ship repairing and shipbuilding;
  • overhaul of construction projects;
  • wood processing industry;
  • when cleaning bases from bricks and concrete;
  • in the process of metal engraving;
  • creating intricate patterns on glass;
  • pre-treatment of products before applying thermal spraying and the use of electroplating operations;
  • when matting ceramics and glass.

Powerful devices made of high-strength material and endowed with special functions through the use of all kinds of attachments are used for drilling holes, grooves and grooves. Designer fantasies with the use of such a unit allow you to process the surface in such a way that the material “aged” and acquired a vintage look.

Sandblasting expert advice

It does not matter which company is better to buy the product, and whether it is in the rating of quality products, Russian or Chinese, budgetary or at a substantial price. The main condition of work is compliance with safety measures. A branded tool can harm human health, provoking the development of serious pulmonary diseases, or cause injury due to the significant speed of ejection of abrasive from the nozzle.

To avoid unpleasant situations and maintain your health, you must heed the following recommendations:

  1. Before work, wear closed shoes made of thick material.
  2. Don't forget to put on a high-strength, special jumpsuit.
  3. Wear a protective helmet.
  4. Protect your hands with leather gloves.

Some "daredevils" in the open air wear only a regular respirator, but the best option would be a helmet with an autonomous air supply. If the actions are performed indoors, then this attribute is required.

It is worth considering that powerful units are never silent, therefore, in order to avoid damage to the hearing organs, it is worth wearing headphones with sound-absorbing functions under the helmet. They can also be mounted in a helmet.

Features of the premises for working with the unit

The efficiency of any work directly depends on the correct organization of the workplace. The sandblaster will function safely and reliably in a room with a normal humidity level. Otherwise, the process can be significantly delayed, and productivity - reduced. If the humidity is too high, measures are taken to reduce the indicator. For these purposes, special dryers are installed at the facility. The best manufacturers produce popular models equipped with this functionality.

Air purity is of great importance. This is achieved through the use of filtration systems. As a rule, they are already built into the devices, which makes it possible to free the air from particles of dust, dirt, oil.If the device operates in an enclosed space, then the object must be able to quickly and efficiently cleaned of sand. The best option is the complete tightness of the room, where the remaining sand will fall into special tanks through holes made in the floor. Can be reused after pre-sieving.

How to choose a device

According to buyers, it is necessary, first of all, to pay attention to the weight of the goods. The structure should not be heavy. In addition, it is advisable to equip it with a chassis to facilitate transportation. As for the tank, its performance must meet international safety standards. When buying, you need to ask the seller for a certificate of verification.

Which product is better to buy depends on the preferences of the master. But there are certain selection criteria that must be taken into account. Moreover, the brand and rating are not fundamental. The design of the pipeline is of great importance. It should be borne in mind that the simpler it is, without fittings and bends, the more powerful the unit. You need to pay attention to the diameter of the hole. The optimal indicator is 32 mm or more.

In order to avoid mistakes when choosing, it is necessary to conduct a review of the products, read the reviews. It is necessary to pay attention to such moments:

  • the ability to function with different granular materials;
  • high assembly reliability;
  • the presence of an automatically closing filling valve or flap;
  • the presence of a feeding container;
  • equipped with an abrasive material dispenser, shut-off valves for air inlet and outlet;
  • the presence of an inspection hatch.

For a powerful compressor, a large diameter nozzle is assumed. This is the only way to increase labor productivity. To choose the right air gun, you should pay attention to the following recommendations:

  • processing of wood, brick or concrete is carried out with a unit with high performance, but low jet power;
  • it is better to clean metal and glass with a strong jet of abrasive.

There are several ways to buy a device of this type: through one of the many online stores (order online) or delivery directly from China via the Ali Express Internet resource. You can also contact a specialized store, where you can then purchase the selected equipment. The last option is beneficial in that the sales manager will help you make the right choice, tell you about new products, give certain recommendations, and provide quality certificates.

A person with certain skills and tools can make a device with their own hands. How to build the author's version, the Internet will tell you. Let the unit not be too powerful, but it will provide significant assistance during repairs.

Rating of the best sandblasting guns for 2020

Hose feed

Sorokin 0.9

One of the most popular copyright brands in Russia. Engineer Sorokin is the author of a large number of special equipment, including sandblasting guns connected to the compressor. The model differs in that it is produced with an upper abrasive tank, which makes working with it more convenient and simple. Tank with a capacity of 0.9 liters. Designed for cleaning small surfaces. It is especially popular with home craftsmen.

The average price is 3000 rubles.

sandblasting gun Sorokin 0.9
Advantages:
  • performs subtle actions;
  • light weight;
  • comfortable to use;
  • durable;
  • functional.
Disadvantages:
  • significant cost.

Patriot GH 166 B

The products are manufactured in China. The main difference is the lack of capacity. The abrasive is supplied through the pipe that comes with the kit. It is immersed in a container of sand, after which the gun is connected to the compressor. Despite the low cost, the product is quite functional and allows you to handle significant surfaces.

Price - 550 rubles.

sandblasting gun Patriot GH 166 B
Advantages:
  • reliable;
  • operational period;
  • cleaning hard-to-reach areas;
  • insignificant weight;
  • a budget option.
Disadvantages:
  • not identified.

Wester SSP - 20

The Chinese manufacturer has tried to create an amazing assistant for DIYers. Despite the mediocre technical characteristics, the device is able to clean small surfaces efficiently. Equipped with a small compressor considered "quiet".

The average price is 1300 rubles.

sandblasting gun Wester SSP - 20
Advantages:
  • compactness;
  • ease of use;
  • reliability;
  • operational period;
  • good value for money;
  • does not make much noise.
Disadvantages:
  • lack of high technical characteristics.

Matrix 57328

Differs in the absence of a tank for abrasive and low weight - 1.2 kg. The pistol is made of high quality metal that is not afraid of mechanical damage. Time of continuous work - from 8 to 12 hours (maximum). Equipped with a standard tank, but you can also take sand from a bucket. Quickly and efficiently cleans car bodies.

The product can be purchased at a price of 1119 rubles.

sandblasting gun Matrix 57328
Advantages:
  • light weight;
  • easy to operate;
  • comfortable;
  • affordable cost;
  • cleaning quality;
  • the nozzle is made of durable steel;
  • functional;
  • the efficiency of sucking sand into the hose;
  • equipped with branded fittings;
  • the throughput channel is not clogged;
  • can be improved.
Disadvantages:
  • lack of maneuverability;
  • short intake hose;
  • it is desirable to equip with a powerful compressor.

Rock Force RF - HSB - II

Produced by a leading Belarusian company using modern manufacturing facilities in Taiwan. High-strength plastic is used in the manufacture of the case, which completely prevents corrosion. The abrasive tank is mounted at the top. The sand is filled in through the throat in the back, which is closed by a hinged cover. The flow regulator is located at the front.

The average cost of production is 4510 rubles.

sandblasting gun Rock Force RF - HSB - II
Advantages:
  • resistant to overheating;
  • the possibility of non-stop operation for 8 hours;
  • Rapid connection simplifies the connection to the hose;
  • durable;
  • multifunctionality.
Disadvantages:
  • weight 2 kg;
  • may break if dropped;
  • the operator's visibility is minimal due to the large top tank;
  • the price, however the device is worth it.

Barrel feed

Kraftool Expert Qualitat 06583

The German manufacturer has launched the production of goods in China, which made it possible to make the price minimal, and the quality worthy of attention. The model consumes 340 liters of air in one minute. The inlet fitting is ¼ ”in diameter. The hose from the compressor is secured with threaded connections. Holds well in the hand thanks to the embossed handle. To avoid pinching the ring finger with the trigger, the handle has a divider. The device is easily suspended on the hook by the loop, thereby freeing the operator's hands. Water can be taken from the tap.

The average cost is 1509 rubles.

sandblasting gun Kraftool Expert Qualitat 06583
Advantages:
  • there is a hole on the body for hanging;
  • reliable grip;
  • ergonomic handle;
  • comfortable use minimizes fatigue;
  • not damaged when dropped;
  • lack of plastic components;
  • performance;
  • high-quality nozzles;
  • full visibility to the operator thanks to the lower reservoir.
Disadvantages:
  • appearance may deteriorate over time;
  • kinking the hose leads to a deterioration in air supply;
  • the threaded connection prevents the hose from being quickly connected to the compressor.

Mighty Seven SX - 3102

The product of the American brand has many advantages. It is equipped with a 700 ml bottom tank and a stainless steel tube through which fine particles pass. Although the pistol is plastic, this does not detract from its merits. It has an unfolded shape with an angle of 110 degrees. This allows you to comfortably hold the device during operation.

Retailers offer high-quality products at a price of 3430 rubles per unit.

sandblasting gun Mighty Seven SX - 3102
Advantages:
  • ease of use of the trigger;
  • even distribution of the load on the arm;
  • reliable grip due to the relief of the handle;
  • weight 350 g;
  • the possibility of continuous operation;
  • can function with large fractions;
  • suitable for weak compressors;
  • compact;
  • the ability to use at height.
Disadvantages:
  • performance;
  • will not cope with paint;
  • overcharge;
  • may be mechanically damaged if dropped.

Metabo SSP 1000

The German manufacturer offers its admirers a high-quality device with a built-in bottom tank for abrasive. The body is made of metal and coated with paint. Thanks to the loop, it can be hung on a hook. The flow nozzle is made of hardened steel. The embossed tip makes it easy to remove. Product weight - 700 g, ¼ inch diameter fitting, air consumption - 300 l / min.

The average cost is 1879 rubles.

sandblasting gun Metabo SSP 1000
Advantages:
  • easy to use;
  • cleans not only flat surfaces, but also ribbed ones;
  • ergonomic shape;
  • can interact with various compressors;
  • the hose quickly connects to the compressor;
  • quality work.
Disadvantages:
  • over time, the appearance becomes unattractive.

Abac 756062

The main difference between the model is an aluminum tank with a capacity of 1 liter. Joins with just one touch. Light weight - 590 g. Convenient when cleaning areas. It enjoys well-deserved popularity among craftsmen due to its ease of use. The body is completely metal, there are no structural elements made of plastic. The product can withstand shocks and drops. Structures, scratches and other mechanical damage are not terrible.

The average cost is 2120 rubles.

sandblasting gun Abac 756062
Advantages:
  • simplicity and endurance of the device;
  • the operator's view is not obstructed by the lower reservoir;
  • quickly the hose connects to the compressor;
  • tank volume;
  • the presence of a hook for hanging;
  • operational period.
Disadvantages:
  • sliding in hand;
  • the metal casting of the case is not quite neat.

Walmec 50316

The manufacturer focused on an all-metal body covered with rubber, which significantly increases its usability. There is a lower container for abrasive. The trigger is pressed with two fingers. Thanks to the protruding stop on the handle, there is practically no possibility of pinching the remaining free fingers.

The tank is made of aluminum, which prevents mechanical damage during the fall. Product weight - 920 grams, air consumption - 500 l / min. For efficiency, it is worth connecting a powerful compressor to the device. The presence of a hook on the back allows you to quickly free your hands.

If you study user reviews, then the product characteristics are good. It allows you to quickly and efficiently free the surface from rust, dirt, paint layers, and make the metal coating completely clean and shiny. Excellent performance is provided by a 6-mm nozzle, which makes it possible to use the unit for professional activities.

The average cost of production is 3589 rubles.

sandblasting gun Walmec 50316
Advantages:
  • copes with dirty areas;
  • continuous work;
  • operational period;
  • reliable;
  • quality;
  • multifunctionality;
  • shockproof housing;
  • tank volume - 1000 ml;
  • weight;
  • easy to use;
  • safe if you follow the rules for working with it.
Disadvantages:
  • it is recommended to connect to the compressor;
  • sometimes the shut-off mechanism of the air line is clogged with sand;
  • not sold in all retail outlets.

Conclusion

Sandblasting machines have long been used in different countries for cleaning all kinds of surfaces. At first they were primitive, but every year they are improved.World manufacturers pay great attention to such basic indicators as power, durability, reliability, safety, convenience, efficiency, functionality. The device has to deal with even the most dirty areas, and not just on a flat surface.

Everyone has their own selection criteria. It all depends on the volume of work performed and their complexity. For a small workshop, it is enough to purchase a low-power unit at a budgetary cost. The main thing is that the device is able to perform the indicated functions.

For overhaul at large facilities, you should pay attention to powerful installations. Although these are more expensive, they allow you to efficiently and quickly achieve the desired result, saving time and labor. It is worth constantly remembering that working with sandblasting machines requires strict adherence to safety rules and the presence of special equipment.

Computers

Sport

beauty