Rating of the best foam generators for 2020

The use of compact washing devices is gaining in popularity. Since with the help of such a device, you can easily clean the car at home. The foam generator produces a dense foam that eats away dirt and does not damage the paint. When purchasing a device, you should carefully study user reviews. The rating of the best foam generators for 2020 describes the advantages and disadvantages of popular models, making it easier to choose.

Operating principle

Anyone can use the foam forming device. The principle of operation is simple. Pour water into the container. Under pressure, water hits the blowing agent. A special limiter distributes the foam evenly over the surface. There is no need to use washcloths or other substances that could damage the coating.

Criterias of choice

In order to purchase a high-quality device that will last a long period, the following criteria should be considered:

The material from which the device is made

The material from which the pump is made is responsible for the service life. When choosing the right model, you need to pay special attention to the material. There are the following materials that can be used:

• plastic - used in cheap models. It has a short service life, and is often damaged by mechanical stress;
• composite - quickly damaged by mechanical stress;
• brass - has high resistance and practically does not oxidize.

For mid-range models, an aluminum alloy is often used. The material tolerates temperature changes, but is easily damaged by impact.

Power

Foam generators at home are most often used for car washing. Therefore, for domestic use, medium power devices can be selected.

Hose length

The comfort in using the device depends on this criterion. The high pressure hose must be more than 6 meters. Thus, all hard-to-reach areas can be treated while washing the car. You also need to pay attention that there is a place on the device for storing the hose. This makes the model more compact.

Availability of spray nozzles

When choosing a device, you should pay attention to the attachments that come with the kit. Spray and spot foam nozzles are often used. If these are not included, they will have to be purchased separately.

Neck size

The size of the neck determines the comfort when filling the liquid.It is also necessary to choose models with a tight lid and a valve to drain excess water.

Most inexpensive

Such models are suitable for domestic use. They have low power and affordable cost.

Kaizen M-2

The model is intended for washing cars and other household tasks, such as cleaning carpets, washing siding and more. In order to use the device, it must be connected to a pump for water supply. The model is economical in water and chemical consumption. The resulting foam has a fine-grained texture. The foam generator works from the network. The tank has a capacity of 13 liters.

• budgetary cost;
• simple use;
• dense, fine-grained foam.

• not found.

The cost of the model is only 2000 rubles. Upon purchase, a coupon for a year of warranty is issued.

DAW 10 DAEWOO EXPERT

The device is one of the most compact and inexpensive. Despite its small size, the foam generator easily copes with the tasks. The electric motor and aluminum pump make the device popular with users. For operation, the model is enough to connect to the water supply system, and users also note the presence of the function of self-water intake. The device is used in conjunction with high pressure washers. Used for washing cars and garden tools. The capacity is 0.5 liters.

• compactness;
• powerful electric motor;
• automatic shutdown function;
• filter to prevent the ingress of solid particles.

• must be used in conjunction with washing machines.

The cost is 1000 rubles.

KWAZAR Orion Super Foame

The device is designed for washing rooms, cars, carpet cleaning. The device is designed for 6 liters. Equipped with a hose and a foam nozzle. Special straps allow you to carry the device on your back during operation. The flask is made of durable plastic that does not undergo oxidation. The manual method of air inflation allows the device to be used almost anywhere.

• comfortable design;
• has universal application;
• does not require a network connection.

• average power.

The price of the device is 5,000 rubles.

Bort Foam Machine Foam Master

The foam generator is used in conjunction with washing machines of the BHR series, it has a small size and a capacity of only 0.5 liters. It can be used not only for car washing, but also for garden equipment, facades and carpet cleaning.

• simple use;
• thick foam;
• used for all types of detergents.

• not found.

Price: 1800 rubles.

AutoExpert Foam

The foaming agent is intended for use with mini washers from manufacturers such as Huter, Stihl, Nilfisk. The device creates a thick foam that thoroughly dissolves dirt in a short time. The body is made of plastic that can withstand mechanical stress. The special foam spray nozzle is made of metal that does not oxidize and will last a long time. The set includes a hose for water supply.

• durable plastic;
• the model takes up little space.

• not found.

Price: 2500 rubles.

Monsoon M-4

The model is powered by a compressor. Light weight and ease of use makes this model popular among users. It can be used to wash the car both outside and inside. The dense foam can be used to clean upholstered furniture or facades. The foam goes through 4 stages of preparation. Due to this, the structure of the foam is fine and dense. The volume of the water tank is 13 liters. The length of the hose is 5 meters.

• compact size;
• easily copes with dirt;
• has a universal application.

• high water consumption.

Cost: 2000 rubles.

Middle price segment

Can be used to handle a car or outbuildings.They are compact in size and are most often attached with straps on the back.

Hawk Lt 25 foamer

A compact product that is used to dispense foam. Suitable for car wash or garden equipment. Special levers are provided on the cylinder, with the help of which the user can independently adjust the foam density. For operation, the device must be connected to the generator. Special wheels for moving the device will make your work more comfortable. The pump and tank are made of steel, which increases the service life.

The hose is 10 meters long and is large enough to wash the vehicle from all sides. A special indicator allows you to track the amount of detergent in the flask.

• uses detergent economically;
• long hose;
• the density of the foam can be independently adjusted.

• overpriced.

The cost of the model is 16,000 rubles.

BOSCH F016800423

Car wash kit. The set includes a foam generator, a high pressure hose. A set with washing machines is used. The hose is 6 meters long. A special sprayer applies foam evenly and can work at a 90 degree angle.

• small size;
• simple use;
• availability of cleaning napkins

• must be used with a sink

The cost of the model is 5,000 rubles.

FM-350A AE&T 50L

A novelty among foam generators. The device is suitable for processing large areas. The volume of the water tank is 50 liters. It is easy to use the device, just fill in the specified amount of water and add detergent. The set includes a gun with a fine filter for foam distribution. The model is powered by a compressor. The reservoir is made of metal, so it can withstand shock and other damage

• large volume;
• high quality metal;
• the foam is fine and dense.

• big sizes.

The cost of the model is 9,000 rubles.

TOP 50C 50L

The product is made of stainless steel. The volume of the water tank is 50 liters, which is enough to wash several cars. In order for the product to function, a compressor must be used. It is necessary to fill the device with water and detergent, foam forms under the influence of air.

The user will be able to independently determine the density of the foam. The mixture is supplied through a hose and, using a nozzle, is distributed over the entire surface.

• the body is made of stainless steel;
• the maximum foam feeding height is 6 meters.

• overpriced.

The cost of the model is 17,000 rubles.

Premium class

The models are intended for professional use. They have a large capacity and are made of stainless steel cylinders.

Idrobase Karcher 9.605-731.0

The model can be used in professional car wash. The capacity is designed for 50 liters of water. This amount is enough to blow off several cars. The sprayer is small, so the foam is applied in an even layer to the desired location. The 10 meter long hose allows you to reach even the most inaccessible places. Also in the kit there is a fan nozzle, with the help of which auto chemicals are applied over large areas in a short time.

The device can be used not only for car care. Often, the foam generator is used for disinfecting rooms, cleaning carpets, and maintaining plastic panels.

• large volume;
• simple use;
• good equipment;
• wheels for moving.

• not found.

The cost of the model is 20,000 rubles.

ProCar 25

The device is made of stainless steel, suitable for professional use. Most often used in car wash complexes for non-contact car washing. For operation, a concentrated detergent is poured into the device. Then the foam generator is connected to the compressor.The model has knobs that can be used to adjust the density of the foam.

Despite the fact that the device is designed for 25 liters, this volume is enough to wash several cars at once. The long hose allows you to distribute foam even in the most difficult to reach places.

• pump and cylinder made of steel;
• long hose;
• regulators of saturation and foam density.

• not found.

Price: 26,000 rubles.

ACG 100 HP

This device is designed to handle large volumes. The capacity of the cylinder is 100 liters; this equipment is most often used for professional washing stations. The device comes with several types of nozzles. For general spraying and thicker foam.

The model can be connected to a compressor and run on compressed air. The thin tube can be used to distribute foam in hard-to-reach places.

• large volume;
• foam density is adjustable;
• universal use.

• no high pressure hoses included

Cost: 24,000 rubles.

LAVOR PRO FOAMJET SX 24

The foam generator has a wide range of applications. It is often used for cleaning food warehouses, industrial premises and vehicles. In order for the device to work, it must be connected to an air compressor.

This device is indispensable if you need to quickly process a large area in a short period of time. Often used in professional car washes and service stations. The tank is made of stainless steel and does not oxidize with prolonged use. With the help of wheels, the device can be easily moved around the room; there is also a brake system that allows you to fix the device in the desired position.

• sparingly uses detergents;
• the surface is processed quickly;
• special nozzles allow you to process surfaces in hard-to-reach places;
• the body is durable.

• high price.

Price: 40,000 rubles.

How to make a foam generator at home

In order to get a device for extensive work, it is necessary to prepare an old fire extinguisher. A foam generator from a fire extinguisher is the most common type of DIY device. For the manufacture of the device, the following materials must be prepared:

• fire extinguisher with a volume of 5 liters;
• metal brushes for washing dishes;
• filter or mesh;
• valve used for tubeless wheels;
• hose;
• gun with nozzle.

You also need to prepare metal scissors and a drill. The installation process is carried out according to the following algorithm of actions:

• it is necessary to unscrew the starting device from the old fire extinguisher. The device is disassembled, it is necessary to remove the tube and cylinder with couplings;
• the gas generator must be cut into two parts;
• a fine mesh is inserted into the upper part of the cut gas generator, which acts as a filter;
• it is also necessary to mount metal brushes for washing dishes there;
• from below it is necessary to mount another mesh;
• in the sleeve on the neck of the gas generator, it is necessary to make a hole with a diameter of at least 8 mm and screw in a foam tablet;
• in the body of the fire extinguisher it is necessary to make a 10 mm hole for the coupling and screw the valve. This is necessary for pumping compressed air;
• a tube must be put on the coupling for pumping air;
• connect the hose to the shut-off and trigger mechanism and connect the gun.

After all the steps have been completed, it is necessary to check all tubes for leaks and secure with clamps. In order not to miss any action, it is necessary to make a work plan on paper.

Outcome

The foam generator is a popular type of device that is used not only for washing the car, but also in domestic conditions. The right device is simple to use and will last for a long time. In order to choose the right device, it is necessary to study the rating of the best foam generators in the opinion of users for 2020.