Rating of the best ozonizers for the pool for 2020

Owners of stationary and portable pools need to have an idea of ​​what measures should be taken to make the artificial reservoir a comfortable and safe object for health. Moreover, even at the design stage, it is necessary to draw up a list of the necessary equipment and determine how much personal time the owner is ready to allocate for cleaning the pool.

Ozonation of water

In the process of ozonation, the water is purified, while no harmful side effects are observed. Let's figure out how useful it is to ozonize pool water. Consider the advantages over other cleaning technologies.

The unit by which water is saturated with oxygen atoms is called an ozonizer or ozone generator. The cleaning procedure is carried out according to the following algorithm: the device drives air through the medium with the lowest percentage of humidity between 2 electrodes, which are under the influence of high voltage. As a result, ozone is formed, as the oxygen in the air is ionized. In the course of processing, the water is purified from harmful impurities. At the end of ozonation of the liquid, sodium hypochlorite is added to it, after which the water purification process is completed.

However, according to the sanitary-technical standards prescribed in the instructions, saturation of water with oxygen atoms is not enough. A whole range of purification procedures should be carried out, and ozonation is only the first step in preparation. In addition to the ozonizer, you must definitely purchase a filtration system. For what it is needed, we will tell you a little below.

• the acidity of the water remains unchanged;
• odors disappear, the taste of water improves;
• is the best natural disinfectant;
• removes manganese and iron from water (in translation into common language, it interferes with the formation of limescale, since in the process of ozonation the sediment is removed from the air by the filtration system);
• if the water is cloudy, then in the shortest possible time makes it transparent;
• in the process of saturation of water with oxygen atoms, by-products hazardous to health are not formed;
• does not change the acidity of the water.

• short-term effect (after saturation of water with oxygen atoms, they quickly decompose);
• ozonation causes chemical destruction of materials, therefore, before purchasing the installation, get a consultation from a specialist so that he can help you choose the technical equipment during the planning and construction of an artificial reservoir;
• high cost of the ozonizer;
• improper operation of the equipment leads to the formation of oxidation by-products, therefore, it is necessary to use other methods of disinfecting water in the pool;
• ozone is a toxic gas, therefore, when working with it, you should strictly adhere to safety precautions, ideally, install special sensors.

Equipment, features

Different ozone generators are used depending on the volume of the artificial reservoir and the purposes of its purpose (commercial or private pool). They are easy to install due to the fact that ozone is injected into the water through a special pipe called a bypass. It makes it possible to reduce the load on the compressor unit and extend its service life.

In some models of the units, a degassing column is installed, which removes excess bubbles that appear during the process of enriching water with ozone.

Installations are also distinguished by size and performance indicators. Each owner selects the unit individually.

Ozone supply for liquid treatment is set depending on plans for its further use. If you just need to neutralize microorganisms in already filtered and coagulated water, the amount of required ozone is 1-3 mg / l. To saturate water from underground sources with oxygen atoms, 0.75-1 mg / l will be needed. When it is necessary to reduce the color and eliminate harmful bacteria in dirty water, the portion of oxygen atoms must be increased to 5 mg / l.

The duration of the interaction of ozone and water is from 8 to 12 minutes. If you increase the pressure, the ozone will dissolve in the liquid faster. The advantage of this method is that there is no need to use additional reagents. When ozone is reduced, oxygen is formed.

Thus, it was established that water saturation cannot be the only method of water purification, while it is an important step in the process of water treatment. It is not recommended to install the ozonizer on your own, as it can be risky to health. The master must set the required dose of ozone, draw up a water saturation scheme and program the unit without error.

Water saturated with gas from the combination of three oxygen atoms is beneficial for humans. The effect will be noticeable after the first ozonation.

Rating of the best devices for ozonizing water for 2020

Everyone knows that the water in the pool must be clear and clean. Before building an artificial reservoir, you must take care of the disinfection of its contents. Currently, the most advanced method of water disinfection is ozonation. This is done using a special device. Below are the ozonizers that hit the top of the best devices.

Single stage

Prozone PZ24

The device is made to destroy harmful microorganisms. It can be used in swimming pools with different designs. The ozonizer is suitable for both private and commercial use. Using this device, you do not have to add all kinds of chemicals to the water. For example, chlorine is contraindicated for many people. It causes irritation and allergies. The ozonizer makes virtually no noise. The most modern technologies are used for its production. The body of the product is made of sound-absorbing materials.

The manufacturers have achieved very good performance. The latest technologies were used in the development of the product. The modern system was patented and put into production. With its help, it was possible to significantly reduce the workload on the compressor, so now the device efficiently produces ozone, which dissolves quickly in water.

The device is easy to transport and install. Additionally, a degasser column can be installed. It will remove excess air bubbles. The manufacturer gives a guarantee for its products. For ozonizers it is 20,000 h, and for compressors 40,000 h.

• suitable for both private use and commercial purposes;
• easy to transport and install.

• not found.

Ozone-20tkd

This ozonizer has its own peculiarity.Manufacturers have added to it the function of producing chlorine from table salt. This chemical element disinfects water well. Such chlorine is not dangerous to humans. It does not irritate the mucous membranes of the cornea of ​​the eyeball. It turns out a double treatment of water. It gives a higher degree of fluid purification. The unit generates 11 g of chlorine and 150 mg of ozone in 1 hour. The device should be installed in pools with a volume of no more than 56.8 cubic meters. The whole system is equipped with a self-cleaning function. It operates in three modes, which differ in time. On the body there are buttons for operating the unit and a small display. There is also a timer scheduling function.

If someone does not like chlorinated water, then you can buy a device without this option, but in this model you can turn off the chlorine generation option and leave only ozonization. The build is very good. It is distinguished by its reliability and long service life.

• ease of use and operation;
• water is purified in a double way;
• the device can process large volumes;
• the unit is multifunctional (there is an option for scheduling work, self-cleaning and delay).

• not identified.

Prozone PZ22

The ozonizer is capable of treating an artificial reservoir with a volume of up to 179 cubic meters. The unit is used not only in private swimming pools. It is often purchased for commercial use. The device has a very high power. It produces 1 g of ozone per hour. The reagent quickly destroys all harmful microorganisms without the addition of all kinds of chemicals. Many hazardous compounds decompose into neutral constituents when exposed to ozone. The end result will delight any user. The resulting water is crystal clear. It will not cause irritation of the mucous membranes and allergies.

The device has a rather high price, but the ozonizer will fully pay for itself if it is used in commercial establishments (hotels, boarding houses, swimming pools). The device is not equipped with additional functions, however, it disinfects water very quickly due to its high performance.

• the device can disinfect large volumes of liquid;
• products are certified;
• excellent build;
• the unit is easy to use and operate.

• high price.

Triogen Corona T8 (O3 S8)

The unit is suitable for public and domestic artificial reservoirs. The ozonizer can disinfect about 400 cubic meters of water at a time. For large pools, devices are manufactured for processing up to 800 m3 of water. The principle of operation of the device is based on a corona discharge. It produces the necessary ozone, but it doesn't need to be limited to a single generator for treating public pools. For disinfection, you can also use a chemical station.

The whole system works absolutely safe. The principle of operation is based on back pressure using a Venturi valve. Ozone enters the stream of liquid passing through the unit.

• air is supplied to the ozonizer from the dryer;
• the corona discharge system is reliably protected from all kinds of overloads, overheating and short circuits;
• the unit is equipped with a flow regulator.

• not detected.

Two-stage

Intex 26666

The ozone in this device is generated by passing air through the corona discharge system. Oxygen molecules break down, after which they combine into ozone microparticles. The resulting gas is injected into the flow of passing water and then dissolves in it. Ozone neutralizes harmful microorganisms and pollutants.

Intex has created know-how. She came up with a two-stage cleaning system. The developers had to combine ozonation with a technology that allows you to purify the liquid by producing chlorine from table salt. This method is more effective. Chlorine generators are completely safe.The substance they release does not cause irritation or allergies. In addition, the devices are cheap to operate, since ordinary salt is used for their operation.

The unit has a display. A timer can be set on it in such a way that the unit will turn on automatically at the right time. The indicator will alert the operator that the unit has started producing chlorine. The amount of production of this element can be adjusted. If it is necessary to increase the disinfection effect, then the chlorine concentration should be increased. The control panel is equipped with a key lock so that settings cannot be accidentally changed. There is also a power saving mode. During operation, the generator will automatically enter sleep mode.

• everything is clearly visible on the display;
• simple control panel;
• instructions on paper and disk;
• the system is equipped with a keypad lock;
• there is a tutorial video on the DVD;
• the set includes adapters for connecting hoses.

• not detected.

OZO-B3 (OZO-W3)

The unit can be used not only at home, but also in the chemical, food, pharmaceutical and many other industries. Ozone is produced here from oxygen with a purity of 93%. This makes it possible to realize the maximum efficiency of the unit and to ensure a high ozone content at the outlet. The dissolution of the substance in water reaches 90%. The developers periodically make small changes to the system design. They can affect the dimensions, appearance and weight of the unit, however, the technical characteristics of the device remain unchanged.

• the dissolution of the substance in water reaches 90%;
• can be used not only at home, but also in industrial conditions.

• not detected.

Pulsar 25PV-B-20-2AT-12SM

Correct operation of this unit improves water quality. It meets all the requirements of SanPiN. The ozonizer is designed for chemical cleaning of liquids, destruction of harmful bacteria, improvement of the organoleptic qualities of water passing through the installation. The unit is ideal for recirculating pools.

The entire system is connected to a pipeline that circulates water in the pool. The Pulsar 25PV-B-20-2AT-12SM unit was manufactured in Russia. It has a good assembly, high-quality components and parts. The device provides an ozone density at the inlet to the pool tank of 0.1 mg / l. Sorption filters are not needed in this case. Such a good result is ensured by innovative solutions that are implemented in the design of the entire unit.

• destruction of harmful bacteria;
• improvement of organoleptic qualities.

• not detected.

Ozomat SB

The device will provide high-quality disinfection in artificial reservoirs, fish farms, private baths. Ozonation is considered the most reliable disinfection method. In this unit, air mass is fed to the ozone generation system. A dielectric and an electrode are located inside the device, between which, after the passage of current, a corona discharge is formed. It transforms the oxygen in the air into ozone. Then the resulting gas enters the water.

The product will delight the buyer with its characteristics. The unit will rid any artificial reservoir of unpleasant odors. All organic formations will also be neutralized. The water will have a crystal clear appearance. All fluid readings will be normal. Ozone is completely safe for the human body. The control system is fully automated.

• high-quality disinfection of water;
• will relieve any artificial reservoir of unpleasant odors.

• not detected.

Triogen based on UV light UV250 (O3 XS 250)

The principle of operation of the unit is not much different from other devices. Ozone is formed from oxygen in the air. Through the Venturi injector, the gas enters the water, after which the liquid is disinfected.The ozonizer is installed in the water treatment system, which is located after the filtration device. The Triogen generator generates UV radiation. Under their influence, air is split into individual molecules. After that, oxygen atoms combine, as a result of which ozone is formed. The resulting gas enters the injector. After this procedure, the water is saturated with ozone. The liquid used becomes clear. All unpleasant odors and impurities evaporate from it, while the taste improves.

• all unpleasant odors and impurities evaporate;
• water quality improves.

• not detected.

Knowing the characteristics of some ozonizers, their advantages and disadvantages, as well as customer reviews, it will be easier to choose an installation.