Rating of the best infrared underfloor heating for 2020

The air temperature in a residential area directly affects not only health, but also human well-being. To maintain a comfortable atmosphere in an apartment or house, an additional method of heating is increasingly used - an infrared warm floor. The system is a profitable alternative to other types of heating elements and does not require complex installation. The rating of the best infrared underfloor heating for 2020 will help you choose the appropriate heater.

Infrared floor system: advantages and principle of operation

Infrared underfloor heating is a modern and most efficient way of heating houses and apartments, in addition to the main heating systems. Due to its parameters, economic benefits and installation method, it is gaining widespread demand and pushes back its traditional counterparts.

The functionality of the heaters is based on the radiation of infrared waves, invisible to the eye and completely safe for the health of people and pets. The spectrum of waves arises when the elements of equipment are gradually heated after it is connected to the network. In contact with furniture and other surfaces, infrared rays first heat them up, then distribute the resulting heat evenly into the atmosphere of the room. This principle of operation allows you to feel a comfortable temperature much faster while the air inside the room is warming up.

It is impossible to talk about the absolute advantages of infrared floors in comparison with other floor heating systems, however, their advantages are impressive:

1. Arbitrary placement of heating elements.

You can heat only the necessary areas: resting places or the most ventilated rooms. This approach saves energy and makes it possible to use the material rationally. If necessary, the device can be disassembled and moved to another place.

2. The ability to carry out the installation yourself under any type of surface.

To lay the heat source in question, you do not need to create a concrete screed and be limited to choosing the final floor surface.

3. Cost effective.

The complete set (thermostat, thermosensor, wiring, IR film, substrate) is significantly lower than other floor heating systems.

4. Frost-resistant and versatile.

The heating element will not fail if it is absent for a long time during cold and frost periods, therefore the floors in question are perfect for a wooden house or summer cottage.

5. Uniform heating throughout the entire height of the room without dehumidification.

Thanks to the action of the wave radiation, the warmth is felt immediately after the system is turned on.

Types of infrared heaters

The entire range of infrared underfloor heating is divided into two types: rod and film.

The rod type of equipment got its name due to the shape of the structure itself - the rod.IR rods contain a material of silver, carbon and graphite and are used to connect insulated copper wires. Thanks to this composition, the heating system produces a self-regulating effect. The disadvantage of this type of floor is that the connection of the heating elements is carried out in parallel: if at least one of them is damaged, all equipment will cease to function. A flat surface is required under the core floor. The main heating mats are placed from the walls at a distance of 15-20 cm. When laying out, the wires should not be intertwined or tangled.

Film types of IR floors are rolls consisting of carbon paste and tightly sealed polypropylene film. Along the edges of the roll, section by section, there are silver and copper strips (tires) through which an electric current is conducted. When the current reaches carbon, heat begins to form. The advantage of the film floor is the location of the heating elements on the section. Each department is completely independent in its work and can be easily removed. The latter makes it possible to position the equipment in any convenient direction under a different finish.

Buying an IR system: tips for choosing

When deciding to acquire an additional heat source, study the information on what to look for when buying the appropriate equipment. The manufacturer and the popularity of the models play a significant role in the choice of goods, but other criteria must also show interest:

• power;

This parameter directly depends on which floor covering the system can be used with. Typically, the power ranges from 130-450 W / m2. For light finishing surfaces (linoleum, carpet) 160 W / m2 is enough, for tiles or porcelain stoneware - up to 220 W / m2, higher power - for industrial conditions and infrared saunas.

• the thickness of the polymer or carbon layers;

The minimum thickness is 0.3 mm, often used is 0.338 mm. Everything that is thicker, the more durable and resistant to external influences, but takes away the height of the room.

• roll width;

The material is produced in rolls from 50 to 100 cm. They are installed so that they are as close to each other as possible. From this rule, as well as the parameters and characteristics of the room, the appropriate width is selected. This minimizes costs and ensures quick installation during repairs.

• the appearance of the stripes;

Silver and copper strips or tires must be free of any damage, gaps or oxidation. The width of the strips of copper alloys should be at least 13-15 mm, with other indicators, the quality of the floors is worse. Silver tires can be 1.5-2 mm wider.

• the presence of an anti-spark grid;

In this case, it is enough to look at the location of the grid of silver stripes: it should be at the border of the carbon layer and the copper bus. The addition of silver to carbon over time leads to sparking and reduced heating power.

• laminated gaps;

When laminating, the space between the carbon strips should be cloudy. With adhesive production technology - transparent. After some time, the adhesive strips become brittle, which affects the service life.

• heating rate.

A high-quality IR floor system heats up in 5-10 seconds.

The best core underfloor heating

In pursuit of creating a favorable microclimate in an apartment or house, manufacturers release new items of infrared heating equipment - rod or carbon, as it is called in the everyday life of the master, warm floor. Let's take a closer look at the popular models that have earned a place in the ranking, thanks to positive reviews, quality and service life.

Unimat Boost-0100

Parameters	Specifications
Average power	133 watts
Max power consumption	160 W / m²
Heating area	up to 0.83 m²
Thermomat width	83 cm
Thermomat length	100 cm
Cold cable	1.5 m
Rated voltage	230V
overheat protection	there is

The popular core film has a self-regulating function, which prevents the structure from overheating and saves electricity. Suitable for laminate, linoleum, carpet, parquet, tiles and porcelain stoneware.When finishing the floor, you can put oversized furniture. They are used in cold and damp rooms, including balconies and the ground floor.

• full self-regulation of power;
• economical;
• does not dry the air;
• neutralizes unpleasant odors;
• service life - 20 years.

• burn contacts in some "moving" places;
• quickly fails in the bathroom.

The average price is 3000 rubles.

REHAU SOLELEC

Parameters	Specifications
Power consumption	320 watts
Specific power	160 W / m²
Area heating calculation	2 m²
Thermomat size	400 x 50 cm
Cold cable length	4 m
Rated voltage	230V
Refractoriness	there is

The powerful heating film is only applied under the tile / screed. Possible for all types of premises. The two-core cable guarantees fast and even heating of the room. The system can be used for both auxiliary and main heating.

• teflon insulation;
• the presence of thermostats;
• mechanical strength;
• fire resistance (self-extinguishing);
• use in rooms with high humidity.

• not for all types of coatings;
• the price is above average - from 9,000 rubles.

Warm floor No. 1 TSP-150-1.0

Parameters	Specifications
Average power	150 watts
Max power consumption	150 W / m²
Heating area	1 m²
Mat / Film Width	50 cm
Mat / film length	200 cm
Cold cable	2.5 m
Working current	0.68 A
Shielded	Yes

The heating system comes complete with the necessary mounting parts. It is used under screed and tiles. Suitable for all premises, provided that it is installed in tile adhesive, as an additional heat source in apartments with central heating.

• two-core cable type;
• internal insulation;
• high heating rate of the rods;
• the ability to order in the online store.

• not identified.

The price varies from 1,500 to 2,000 rubles.

Warmstad WSM

Parameters	Specifications
Power consumption	180 watts
Specific power	150 W / m²
Area heating calculation	up to 1.2 m²
Thermomat size	240 x 50 cm
Cold cable length	2 m
Rated voltage	230V
Earthing	there is

The heating mat model is in great demand in the building materials market. According to buyers, it is easy to install it under the tile adhesive, and the elements heat up at a tremendous speed. Suitable for linoleum, laminate, parquet and carpet.

• fast and easy installation;
• teflon insulation;
• suitable for wooden floors.

• short service life - 10 years

The cost is 1900 rubles.

Teplolux Express

Parameters	Specifications
Max. heating area	5.04 m²
Power consumption	560 Wt
Mat size (lxw)	280 x 180 cm
Cold cable length	2.5 m
Rated voltage	230V
Shielded	Yes
Operating temperature	12-20 ° C

The equipment is a mobile solution for heating all living spaces. The system heats up the floor covering to an optimal and comfortable temperature for a person, preventing an increased load on the network. The instructions for use provide guidelines for placing the mats under the carpet.

• does not require complex installation;
• heats up the entire area within an hour;
• safe to operate;
• keeps warm for a long time.

• short service life;
• relatively high price - 9,500 rubles.

The best IR film floors

Heating a home with infrared film has a number of advantages over other types of heating. The presented rating of high-quality models of film floors will help you decide on the right purchase.

Caleo GOLD

Parameters	Description
Power consumption	170 watts
Specific power	170 W / m²
Heating area	1 m²
Film width (cm)	50
Film length (cm)	200
overheat protection	there is

The popular Caleo brand thermal film, combined with the anti-sparking silver mesh, ensures rapid heating of the elements with less energy consumption. Suitable for standard living rooms with any type of flooring.

• with partial self-regulation function;
• fireproof and economical;
• installation without screed and tile adhesive;
• antiallergenic effect;
• step by step instructions included.

• not identified.

The price is 2300 rubles.

IR Q-Term Film

Parameters	Specifications
Power consumption	240 watts
Specific power	220 W / m²
Roll size	0.5 m
Thickness	0.33 mm
Rated voltage	220V
Earthing	not

Budget models are not inferior in quality and service life. The powerful infrared film fits any finishing surface, whether in the playroom or in the office. You can install the heating system yourself.

• high power;
• low price - only 250 rubles;
• easy installation at home.

• heating area not specified.

EASTEC Energy Save

Parameters	Description
Power consumption	22000 watts
Specific power	220 W / m²
Heating area	up to 100 m²
Film width (cm)	100
Film length (cm)	10000
overheat protection	there is
Application	linoleum, parquet board, laminate, carpet

The thermal film has a homogeneous structure, high insulation and mechanical strength of the heating elements. Installation does not require special skills and additional equipment. How to install is described in the user manual. Suitable for damp and cold rooms.

• self-regulation technology;
• easy installation;
• prevents fungus;
• suitable as a basic heating method;
• the ability to order online.

• it is recommended to use a heat reflective backing.

Cost - from 700 rubles.

RexVa XicA XM305

Parameters	Specifications
Max. heating size	1 m²
Power consumption	220 watts
Specific power	220 W / m²
Film size	200 x 50 cm
Thickness	0.338 mm
Working current	1 A
Refractoriness	there is

Inexpensive models of film floors from a well-known manufacturer are compatible with different types of surfaces. The design has increased fire resistance and moisture resistance. What are the characteristics of thermal films, and what is included in the package, you can find out from the seller.

• heating the entire room in 5-40 minutes;
• the optimal ratio of quality and price - 250 rubles;
• energy saving;
• stable and durable;
• keeps you warm and healthy.

• not identified.

Electrolux ETS-220-2

Parameters	Description
Heating area	2 m²
Power consumption	481 Wt
Average power	220 W / m²
Mat size (lxw)	400 x 50 CM
Rated voltage	220V
Shielded	not
Application	for linoleum, laminate, parquet, carpet

The entire surface of the thin film evenly warms up the area in a short time and retains warmth and comfort. The installation of the material is carried out simply, without significant construction work. You can use local heating zones - only under a table, sofa, etc.

• high quality and safe material;
• fast and easy layout;
• a complete set of required items.

• not identified.

The cost of a heated floor is from 2500 to 5000 rubles.

For heating systems, water or antifreeze liquid is most often used. It is a well-known fact: the more efficient technologies in the field of heating, the more expensive they are. The development of modern floor structures has destroyed this myth, and the presented review of the best infrared underfloor heating for 2020 confirmed the information.