Rating of the best shower trays for 2020

Rating of the best shower trays for 2020

A shower tray is an integral part of a shower stall or corner. It is he who largely affects the comfort when taking an invigorating or relaxing water procedure. For the manufacture of pallets, a variety of materials are used: acrylic and cast iron, steel and earthenware, and even natural stone, or glass, or wood.

Competent selection of the shower tray

The shapes and sizes of pallets are presented on the market by manufacturers in a large assortment, so finding the right option will not be difficult. A well-chosen pallet will add coziness to a small bathroom or give an aesthetic appearance to a more spacious room.

A shower enclosure can be built almost anywhere in the bathroom. The main priorities will be its size and configuration. On small areas, experts advise mounting models in the form of corners. In the case when the area of ​​the bathroom allows, then this accessory can be mounted even in the center - the main thing is that there are no obstacles for plumbing communications. Such drastic changes are typical for global redevelopment or major repairs.

Without a doubt, the fact remains that the larger the bowl of the pallet, the more comfortable the acceptance of water procedures. As a standard, this size is selected for the largest family member. If you do not correctly navigate this issue, then it is possible that someone will have to take a shower in an extremely uncomfortable position. For an ordinary Russian apartment, a square-shaped pallet with dimensions of 80 by 80 centimeters is considered optimal. At the same time, it is necessary to take care of the depth of the bowl - the higher its sides, the more inconvenient it will be to enter it (this will create a particular problem for sedentary family members and children).

At the same time, the installation of a flat pallet sample is fraught with some problems. Usually, the bell of the sewer pipe is located slightly above the ceiling. But this problem can be solved in two ways: raise the floor level by at least 20-30 centimeters or purchase a special small-sized pump - a sololift.

Manufacturing material

Cast iron

A product made from this material will most likely last a very long time, however, its enamel coating will be damaged much earlier. It can be argued without doubt that in a year or two, a technically sound cast-iron pallet will have an unpresentable appearance.In addition, cast iron alloys by themselves have poor thermal conductivity, therefore, before taking a shower, the product should be doused with a stream of hot water. And on top of that, the extremely large mass makes this item very inconvenient for transportation and subsequent installation.

Steel

Models from this material are much lighter than from the above. Their modern designs are mounted on a frame with special legs that allow you to adjust your own height. They are of two types:

  • Thin-walled - in such, the thickness of the bottom and sides does not exceed one and a half millimeters, they are quite light, but create a fair amount of noise when a stream of water hits them;
  • Thick-walled - they have the thickness of the entire case can be 3.5 millimeters and more, they are slightly heavier than the previous ones, but they produce little noise from water jets.

INFO: it is still possible to find a thin-walled model with good sound insulation on the market - at present, manufacturers equip such samples with rubberized inserts treated with polyurethane foam to reduce noise.

However, the main disadvantage of steel models is the high probability of chipping of the enamel coating with excessive mechanical shock, which in the end will necessarily lead to corrosion.

Acrylic

Acrylic pallets are characterized by their aesthetic appearance, have a low weight and are relatively inexpensive. It should be noted that products made from this material are extremely sensitive to large mechanical loads - dents, chips and even holes are formed almost instantly. However, minor scratches are very easy to grind, and more serious ones can be fixed with a special repair kit. As a rule, they have a limited load and it should not exceed 130 kilograms. The strength of this product can be increased by reinforcing, and the more the layer comes out in thickness, the stronger the product will become. A metal frame or a support made of polyurethane foam based on polyester can also prevent premature deformation of the object.

Ceramics

A model made of a similar material can be successfully combined with other faience items in the bathroom. Usually they are available in two colors - white or beige, but if you wish, you can find other "funny" colors. Despite some massiveness and special stability of such samples, ceramics is an extremely fragile substance. If you drop any heavy or large thing on it, then the probability of breaking the pallet is very high. In addition, it will not be possible to repair it - a complete replacement will be required. It is clear from this that an almost perfectly flat surface is required to install the ceramic object. In fairness, it is worth mentioning that porcelain counterparts can also be used (significant strength, presentable appearance, improved quality), but they will cost much more.

Fake diamond

There is no doubt that such exclusive models will adorn any bathroom. A variety of fillers used in conjunction with polyester resin will result in a very durable shower device with excellent sound-absorbing characteristics, resistant to chemical and mechanical stress. In addition, the choice of color assortment is very wide: here it is also possible to emulate a marble or wood surface. Among other things, the material is design and allows the latter to produce truly unique products.

Natural stone

It is used exclusively for design projects, in this case, as a rule, travertine or marble with granite is used. These rocks retain heat well, are characterized by increased strength and increased service life. However, such items of the shower cabin are very massive and require an almost perfectly flat surface for installation. Yet their increased price is justified by the noble appearance, the degree of high comfort and extreme beauty.

Glass

Such samples are distinguished by external elegance and special grace. During the production process, they are treated with a special anti-slip coating and a special layer is applied to them to protect them from chips and scratches. Their assortment range is also distinguished by high content. Their main drawback is their overpricing.

Wood

Really unique, very expensive and high quality shower fixtures. They can be an ideal extension for bathrooms, where the walls are also finished with wood or wood upholstery. Most often, in production, either oak or larch is used, which are treated with high pressure steam.

Dimensions and shapes

A wide variety of pallet forms will allow any customer to choose a model of their own taste. But still, often, when choosing, you have to rely not on your taste, but on the area of ​​the bathroom and its other features (after all, these rooms in ordinary Russian apartments are rather modest in size).

Corner shapes

When choosing such samples, it is possible to immediately get a double savings - to "win back" the extra meters in area and not to mount the walls of the shower stall separately. The angular forms include:

  • Square samples - regardless of the material of production, they have a typical size of 70-100 centimeters at a 5-centimeter step. There are also the most spacious models with sizes from 110-130 centimeters, however, they do not find much attention among buyers;
  • Rectangular patterns - this is one of the really popular models, because it is easy to make it in various dimensional proportions. They are compact and ergonomic, comfortable for taking a shower;
  • Radial patterns - these are one-fourth of the circle and are mounted in the corner of the bathroom. Their use is extremely advisable in rooms with very small areas, and at the same time, with their rounded part, they give the bathroom some aesthetics. Their sides can be either equal or different (as in a rectangle);
  • Pentagonal specimens (pentagonal) - they have one 90-degree angle and can also be placed in small areas.

Complex shapes

These include the following models:

  • Semicircular - the flat part is tightly adjacent to the bathroom wall (they cannot be used in corner boxes);
  • Round - as a rule, they are installed in a rectangular or square base, but they can also serve as a podium for a primordially round booth;
  • Oval - ideal when the shower space is not constrained in size;
  • Polygonal - they are extremely rare, mainly used in design projects;
  • Irregular (asymmetric) - characterized by very complex bending lines. They are made mainly according to design drawings, they can have arbitrary styles and color solutions (the version stylized as a heart is popular).

Recommended pallet height

This factor can be extremely different - from almost zero height (almost the same level with the floor) to very high values ​​- from 25 to 45 centimeters. The latter, in principle, form a small bathroom bowl and the entrance / exit to them is somewhat inconvenient, therefore it would be more expedient to build small steps and cover them with anti-slip material. At the same time, you can easily wash or bathe a small child in a deep tray (especially since they are usually equipped with a special seat).

There are also such products that, at first glance, have no rims at all and in rare cases the depth of their bowl reaches 4 centimeters. And yet, for them, it is possible to revet the sides with tiles or tiles. These shallow pallets are necessary for people with disabilities.

The most common option today is considered to be models with a bowl from 5 to 20 centimeters (perfect for people who are accustomed to having their feet in water during a shower).

Doors and fences

Naturally, if you equip a shower stall, you will have to purchase fences or doors. However, there are some nuances here:

The use of special glass is due to the fact that elements made of plastic and other polymers are more scratched, burst for no apparent reason, and are difficult to clean. Despite their cheap cost, they quickly lose their presentable appearance;

The use of aluminum and stainless steel - these materials are best used for doors - this will increase both strength and service life. It should be noted that it is not worth using conventional steel, because it is prone to rapid corrosion processes.

IMPORTANT! Glass doors and fences are also good because they are easier to maintain. Especially in this regard, matte glass is unpretentious - it almost does not leave streaks and is well washed. It is necessary to apply a decorative pattern only from the outside, because inside it will be clogged with dirt.

Safe use of shower trays

The main safety feature of the pallet is that the bottom does not have to be completely smooth. Otherwise, the risk of slipping and falling increases significantly. But there are also models with absolutely smooth bowls on the market. In this case, you can buy special grooved stickers for the bottom, or a plastic grill is installed there. Nevertheless, even a smooth surface today is treated by manufacturers with a special anti-slip compound, but such a coating should be renewed approximately every five years.

Typically, the safety of a pallet product is achieved by using the corrugated surface of its bottom - the pattern can be made in the form of flowers, crosses / rhombuses. In addition, this pattern will have a massage effect when taking a shower.

Optional accessories

These include:

  • Siphon cover - it is either supplied with the equipment or purchased separately. Has additional aesthetic value, closes the drain hole;
  • "Click-clak" system - thanks to it you can open and close the water drain without using your hands - the siphon cover is raised / lowered by pressing the toes;
  • Special seat - usually fitted with high-sided pallets where it is built-in. And for low models, removable / installable options are provided;
  • Anti-slip coating - adds safety in the process of using the product (sometimes a plastic grill or rubber mat may appear instead).

What is the cost

The price of the device in question will depend on many parameters and the potential buyer needs to be prepared for a wide range of prices. The following factors will play a significant role in pricing:

  • Country of origin - Asian samples are much cheaper than others, and the reason for this is cheap labor, and this immediately affects the quality. The countries of Eastern and Southern Europe offer products of the middle price segment. But manufacturers from the "old world" (Germany, Italy, Spain, England) produce a product of the highest quality, distinguished by elegance and high technical level;
  • The name of the company ("brand") - it is natural that the more famous the name, the more the company is responsible for its products in terms of quality. An experienced manufacturer is always trying to improve production technology by applying all kinds of innovations and perfecting designs. Hence it is clear that pallets from a company with a worldwide reputation will cost several times more than from a "know-name" brand;
  • Material of manufacture - budget options are made of steel, sometimes it is NOT even stainless. Subsequently, they will require additional protective coating. The most expensive items are made of wood, special glass or natural stone. "The golden mean" can be called ceramics or acrylic;
  • Shape - the cheapest are square shapes, because the easiest way to make them is by stamping. The most expensive ones are asymmetric - they require almost manual work;
  • Dimensions - in this case, it will be true that with an increase in dimensions, the price also increases.And here you can add depth - the more it is, the more expensive the product;
  • Place of purchase - the price of the goods in a specialized store will be clearly higher, but there the buyer is guaranteed quality. But on the market everything will be much cheaper, but, accordingly, there will be no guarantees. However, it is always possible to use proven online sites for purchase.

Rating of the best shower trays for 2020

Budget segment

3rd place: BLB CF70 Universal

Standard and high quality shower tray made in Portugal. Easy to install, has a variability of models on the sides of the square, the safety of use is ensured by floor notches. In addition to anti-corrosion enamel, it also has an anti-slip coating.

NameIndex
The formSquare
Installation methodStation wagon
MaterialSteel + enamel
AdditionallyAnti-slip surface
Dimensions, mm700x700x135
Price, rubles2100
pallet BLB CF70 Universal
Advantages:
  • Economical cost;
  • Sufficient protective coating;
  • Easy installation.
Disadvantages:
  • Common steel used.

2nd place: LORANTO X-ray

Products from a leading Chinese manufacturer have European certificates of conformity and environmental safety. During production, the latest technologies are used (for example, an environmentally friendly enamel coating). The sample has a universal mount, its installation is not difficult. Fits perfectly even in a small bathroom.

NameIndex
The formRadial
Installation methodStation wagon
MaterialSteel + enamel
AdditionallyNot
Dimensions, mm800x800x135
Price, rubles2600
LORANTO X-ray pallet
Advantages:
  • Environmental coverage;
  • Convenient shape and size;
  • Focusing on ultra-small areas.
Disadvantages:
  • There are no additional options.

1st place: AQUA TORIA P909015

Quite a massive model with fairly high sides. Designed for a bathroom that is not constrained in size. Thanks to its production from stainless steel, it can easily withstand temperatures of +75 degrees Celsius and a user's weight of 150 kilograms. The extended warranty is extended - 12 months.

NameIndex
The formSquare
Installation methodStation wagon
MaterialStainless steel
AdditionallyNot
Dimensions, mm900x900x150
Price, rubles3000
pallet AQUA TORIA P909015
Advantages:
  • Increased strength indicators;
  • The use of "stainless steel";
  • Actual price.
Disadvantages:
  • Not identified (for its segment).

Middle class segment

3rd place: River Light R

An excellent model that fully meets the parameters in terms of price / quality ratio. The acrylic body guarantees a long service life and unpretentious care. High bumpers can be used as seating. In general, the bowl is fine for small washings. Siphon size - 90 mm, it is possible to install an additional "click-clack" accessory. Manufacturer - Russia.

NameIndex
The formQuadrant
Installation methodStation wagon
MaterialAcrylic
AdditionallyIntegrated seat
Dimensions, mm1000x1000x150
Price, rubles5800
pallet River Light R
Advantages:
  • Excellent value for money;
  • Equipped with a built-in seat;
  • A removable panel is supplied.
Disadvantages:
  • Not found.

2nd place: Erlit ER 100H

Although this sample has small sides, it is extremely functional - its own height can be adjusted with the help of special legs, the base itself can withstand a weight of up to 210 kilograms, the siphon at the base has a water seal. The working surface has a long-term anti-slip coating.

NameIndex
The formSquare
Installation methodStation wagon
MaterialAcrylic
Additionally"Click-clack" on the siphon
Dimensions, mm1000x1000x150
Price, rubles7100
pallet Erlit ER 100H
Advantages:
  • Multifunctionality and versatility;
  • Extra strength;
  • Additional options.
Disadvantages:
  • Very small sides (unlikely to prevent water from entering the floor).

1st place: Royal Bath Bk RB90BK

A truly ergonomic and comfortable model from a Russian manufacturer.High sides do not allow splashing water, you can take a quick shower or sit comfortably on the built-in seat. Can be used as a bathroom for small children. Has additional shielding and an extra-long warranty - 10 years!

NameIndex
The formRadial
Installation methodStation wagon
MaterialReinforced acrylic
AdditionallyShielding
Dimensions, mm900х900х330
Price, rubles11500
pallet Royal Bath Bk RB90BK
Advantages:
  • Very long warranty;
  • Reinforced additives acrylic material (increased strength);
  • Great depth.
Disadvantages:
  • Far from a small price.

Premium class

3rd place: RGW Stone Tray ST-0128

Not a bad model made of artificial marble, it has an exclusive design solution. Rather suitable for bathrooms where there is no need to save space. Thanks to the small sides, the comfort when taking water treatments will be even better. The pallet is suitable for all family members.

NameIndex
The formRectangular
Installation methodProfessional
MaterialFake diamond
AdditionallyShielding
Dimensions, mm1200x1200x250
Price, rubles18500
pallet RGW Stone Tray ST-0128
Advantages:
  • Noble appearance;
  • Big square;
  • Suitable for people with disabilities.
Disadvantages:
  • Heavy to transport;
  • Requires professional editing.

2nd place: Jacob Delafon Flight

Another expensive model for large spaces. Despite its size, it does not require professional installation, it can be installed independently. Small sides prevent splashing water, reliably retaining all moisture. Manufacturing material - reinforced acrylic, provides good sound insulation.

NameIndex
The formRectangular
Installation methodStation wagon
MaterialReinforced acrylic
AdditionallyClick-clack siphon
Dimensions, mm1000x800x40
Price, rubles20000
pallet Jacob Delafon Flight
Advantages:
  • Composite material;
  • Provided sound insulation;
  • Additional options.
Disadvantages:
  • Not found.

1st place: WasserKRAFT Isen 80 × 80 26T00

A popular sample from a German manufacturer. Made in a radial shape and will fit any available space. Execution material - reinforced acrylic. In addition, there are sliding legs, siphon, anti-slip coating.

NameIndex
The formRadial
Installation methodStation wagon
MaterialReinforced acrylic
AdditionallyClick-clack siphon
Dimensions, mm800x800x175
Price, rubles21000
WasserKRAFT Isen pallet 80 × 80 26T00
Advantages:
  • Compact forms;
  • High sides;
  • Sufficient depth.
Disadvantages:
  • Not found.

Instead of an epilogue

You can buy pallets at any plumbing store - this will be a guarantee of quality. However, if an expensive sample is required, then in order to save money, you can order it on Internet sites. Best purchased directly from the manufacturer.

Computers

Sport

beauty