Rating of the best balancing machines and stands for 2020

The history of the emergence of balancing machines began over 50 years ago. The design was developed by the American engineer Lee Hunter, he was the first to think over the design of an automated wheel balancing machine, without which no modern tire changer or car service can do.

An indispensable attribute for the service industry

Previously, such nuances were solved using a static method. It is understood that the wheel was put on a special rod, after which it was spun. Stopping points were marked. To determine the area of ​​imbalance, such manipulations were repeated several times. It could take all day to service one vehicle. In addition, a high level of error should be noted, which was overcome over the years. How often do you need to use these services?

According to ordinary people, if the car regularly drives on city roads, then the car service should be contacted at least once every six months. These trips coincide with seasonal rubber changes, which saves you money. However, if the vehicle often drives off-road or in the suburbs, then it is recommended to check the machine once every few months. Balancing has a beneficial effect not only on the operation of the "wheels", but also:

1. Crankshaft.
2. Cardan shaft.
3. Compressors.
4. Pulleys.
5. Couplings.
6. Rotors.

The point is that debugging can be directed to the functioning of individual elements of the machine. How to understand that such manipulations are necessary? For those who have just recently been driving, this question is more than relevant. In order not to make common mistakes, you need to pay attention to how the car goes at speed, and whether there is vibration in the steering wheel area. These calls are the first things a motorist should pay attention to and visit a tire fitting service in the near future.

Experts advise doing balancing after each hit of the wheel in a large hole. If the impact is really strong, and there was a visible deformation of the disk, then you simply cannot do without stands. In addition to leveling the damaged surface, you should resort to the services of specialists.

Timely contacting specialists will help to avoid many problems, including:

1. Deterioration of the suspension.
2. Accelerated wear of the hub bearings.
3. Abrasion of tire treads.
4. Increased steering loads.

The main task of the tire service worker is to identify the imbalance and eliminate it. In this case, compensating loads on certain parts of the disc are eliminated.In addition to the personal experience of the employee, an important criterion is the availability of quality equipment from the best world manufacturers. The average cost of the work will depend on the wheel diameter. The amount of 200 rubles does not seem so big, especially when it comes to the safety of yourself and others. What are the settings?

Equipment types

Popular models for passenger cars are in the greatest demand. During rotation, the X and Y axes of the wheel must remain unchanged. Otherwise, centrifugal force will be directed to other elements of the vehicle. An imbalance can occur due to an encounter with a serious bump, fossa, or other type of load. In the case of considering situations related to trucks, excessive vibration of the body itself, which occurs during the transportation of goods, should be added to the general list. Such moments negatively affect the suspension and the service life of the tires.

Installations designed for trucks are classified as specialized. On ordinary machines, the tasks cannot be completed. In addition to more accurate balancing recognition, they can significantly increase the service life of rubber and other vehicle components. After a series of successful manipulations, vibrations on the body become less, the load on the chassis and the hub decreases, and an increased ride smoothness is observed. Unlike conventional stands, machines for trucks are equipped with a reinforced frame.

How does it work

It is extremely difficult to imagine a modern tire changer without equipment of this type. Even in small workshops there is a place for a device that takes up to 3 sq. m area. Pre-reinforcement of the foundation is also not required. The base of the structure is reinforced. On one side, the shaft for the wheel is attached. A protective cover is attached on top. Depending on the power of the electric motor and the dimensions of the casing, the size of the wheel that is attached to the stand depends.

The principle of balancing is to spin the wheel, which detects axle deviations during rotation. In each of the models, this happens in a different way.

For convenience, below is a comparative table with an overview of the main indicators.

type of drive	Description
Auto	The best solution for most businesses in this service sector. The necessary operations are performed automatically - by a machine. The wheel spins by means of the shaft. Measurements are carried out with an electronic ruler. The detected deviations are displayed on the monitor. After a short processing of the data, the installation locations of the weights are determined automatically, as well as their weight. For more convenience, voice commands can be used.
Semi-automatic	The tire spinning also occurs automatically. No outside effort should be made for this. Regardless of the brand, the data will have to be entered into the computer manually.
Manual	The shaft is spun manually. A mechanical ruler is required to measure basic parameters. The information obtained is compared with the GOST guideline for deviations.

What should you pay special attention to when choosing popular models? On the manufacturer, consumer reviews and the cost of the basic kit. Most modern enterprises rely on the quality of equipment, thereby reducing the number of employees. In this case, preference should be given to expensive and fully automated structures of Russian or Chinese production.

Such devices in one cycle are able to identify problems and fix them if necessary. More customers will be served per work shift, which means that the income will be higher. Customers spend less time visiting the service station, which means they will prefer to return there again.

Rating of high-quality and inexpensive balancing machines

AE&T B-500

The model is used for troubleshooting the wheels of cars, small trucks and motorcycles.It functions in static and dynamic mode. The perfect solution for small and developing centers. It is based on a progressive technology that allows all the necessary manipulations to be carried out in one cycle, even if the weights are placed close. In addition to the calibration mode, there is the ability to work with alloy wheels (three modes). The panel is equipped with a large and user-friendly display.

At the price, such a kit is profitable, because the purchase will cost 48,000 rubles.

• after lowering the casing, auto start occurs;
• numerous modes of operation;
• automatic calibration function;
• modern technology for installing weights and taking measurements;
• data entry by means of a measuring lever;
• the presence of a dynamic and static mode.

• significant are missing.

START Sivik SBMK-60 E

The model belongs to the budget category. In addition, the device positions itself as reliable and extremely easy to use. It should be noted that the operator may be without proper work experience. There is a proprietary protection against voltage surges - "power guard". To start the system, press the appropriate button or close the cover. The electronic ruler is responsible for determining the diameter and distance. A special sensor is responsible for the amount of work performed. Based on numerous reviews, a 40 mm spindle assembly deserves special attention.

You can buy the device in the online store at a price of 52,000 rubles.

• strength;
• build quality;
• ergonomics;
• the set contains different-sized cones, calipers and casing;
• warranty - one year;
• noise reduction option.

• "Split" with limited functionality.

Sorokin 15.21

It is used for servicing trucks, cars and motorcycles. The unit is designed for medium and light workload. The model will not pull the active thread. The information can be viewed on the display with the Russian interface. When placing loads, a sound notification occurs. The program is launched after entering the data. Calibration is performed independently by the operator. The noise figure is 70 dB, which is considered an acceptable figure. The diagonal of the display is 24 inches, which allows visual and informational control.

Cost - 53,000 rubles.

• convenient display;
• in the kit you can find calipers, pliers, flange, clamping nuts and cones;
• insignificant error in 1 g;
• eliminates both dynamic and static imbalance.

• parameters are entered manually;
• build quality.

AE&T B-520

The unit is capable of servicing wheels with a diameter of 10-24 inches, which are used by light trucks, cars and motorcycles. It is this model that is better to buy for working with alloy wheels. It is characterized by the output of indicators of increased accuracy during self-calibration and routine diagnostics. Measurements are carried out automatically. The control panel is equipped with a color display, cells and a work table where weights are placed. The shaft is made of high-strength materials and has an increased strength index. There are three separate programs for working with aluminum discs. There is also a static and dynamic mode. Autostart when lowering the casing.

How much does the model cost? The purchase will cost 62,000 rubles.

• automatic ruler for measurements;
• high-precision equipment with minimum error;
• high strength shaft;
• separate modes designed to work with alloy wheels.

• not identified.

AE&T В-820

The novelty in the world of balancing stands has a modern appearance and a set of characteristics that will help a novice mechanic to start his own business. Works with 10-24 "rims, which is considered standard for small trucks, cars and motorcycles. Designed to work with cast structures.It is characterized by the presence of a high-precision device, which is used to install self-adhesive weights. Excellent indicators were found both during self-calibration and diagnostics. The computer makes measurements on its own. The product is equipped with a color display, special cells for weights and a work table.

The purchase will cost 87,000 rubles.

• stability;
• steel body;
• automatic ruler;
• high-precision equipment;
• shaft accuracy and strength;
• a separate program for alloy wheels;
• precision in working with weights.

• not identified.

TOP of the best balancing machines in the middle price segment

PULI PL-6579WR

A well-known brand product from a Korean manufacturer, based on the latest integrated circuits. It is a complete diagnostic complex that displays information in real time. Equipped with a 15-inch display. The operating system at the design of our own production, which indicates the high accuracy of the measurements. Weights are added automatically by stopping the wheel for this. The rotation of the shaft is fixed separately. The laser pointer is responsible for the correct position.

Cost - 95,000 rubles.

• illumination of disks during the check;
• automatic switching on, stopping and hanging weights;
• over 10 modes;
• durable body;
• clear management;
• self-adjustment of the tire.

• price.

AE&T B-600

High quality product from a well-known and time-tested manufacturer. In addition to modern design, it should be noted that there is a set of programs that can cope with the indicated functions. Responsible for balancing the wheels of cars, trucks, motorcycles in both static and dynamic modes. The perfect solution for new and small workshops. A two-pin measuring ruler is responsible for the placement of balancing weights and measurements. The "autoprogramm" option helps to set the layout. Illumination is provided by LEDs located on the body. The computing unit is built on a Texas microprocessor, which belongs to the high-performance category. The electromagnetic type brake significantly reduces the time allotted to stop the wheel.

Cost - 99,000 rubles.

• electromagnetic brake;
• memory function;
• the presence of a laser navigation system;
• LED lights;
• two-dimensional measuring system;
• option "autoprogramm";
• function "moto";
• digital display.

• not identified.

AE&T B-823

A modern device that allows balancing the wheels of passenger cars. Equipped with surge protection and self-diagnosis. The machine identifies any malfunctions quickly and displays them on a convenient display. Special attention should be paid to the interface of the application used, which will be understandable even to a person who has never dealt with such equipment before. There are several operating modes that will help you easily cope with everyday tasks. Marking and self-calibration is carried out by the system.

Price - 101,000 rubles.

• numerous modes of operation;
• interface;
• automated ruler;
• display;
• assembly;
• speed of work;
• quality of manipulations.

• small wheel diameter.

NORDBERG 4523A

It is such a company that it is better to buy automated equipment if the company has sufficient funds. One of the main selection criteria is the characteristics of this model at a height. We are talking about the distance, width and diameter of the serviced elements. All the necessary information is displayed on a convenient 17-inch LCD display. It operates on a voltage of 220 V. The assembly and manufacture of key elements takes place in China. However, already assembled equipment is being tested in Europe, as evidenced by the relevant certificates.In the kit, a potential buyer can find a meter, a compass, pliers, weights and nuts.

Price - 114,000 rubles.

• quality set with everything you need inside;
• low noise figure (70 dB);
• Comfortable LCD display
• table with separate compartments for weights;
• a separate program is responsible for the hidden installation function, which is mounted in a niche located near the wheel spokes;
• optimization of the tire position;
• self-calibration;
• self-diagnosis;
• illumination of the workplace;
• versatility (suitable for both a small workshop and a large service station).

• not identified.

AE&T B-829

A popular model from a well-known manufacturer. An excellent choice for small and semi-professional workshops that service passenger cars and other small vehicles. Provided that the budget of the company allows, then you should give preference to high-quality and time-tested equipment at an acceptable cost.

The average price is 119,000 rubles.

• self-diagnosis;
• protection against breakage and power surges;
• system input of three main parameters;
• ruler included;
• numerous modes;
• comfortable LCD display of the optimal size;
• systemic labeling and calibration.

• not identified.

Master Tires MT-1200

The balancing structure is designed for servicing trucks. It should be noted the presence of a pneumatic lift, which is so necessary for working with large equipment. Allows you to identify the imbalance of both cargo and passenger wheels. Differs in the presence of a powerful microprocessor, which has an error of 0.005 kg.

Cost - 142,000 rubles.

• high-speed processor with stable clock frequency;
• a durable casing is provided for the operator's safety;
• error codes during calibration are displayed on the screen;
• built-in pneumatic lift;
• clear interface.

• absent.

Rating of the best premium balancing machines

CORGHI EM 9250 CompactLine PREMIUM

One of the highest quality products on the market today. However, the quality fully justifies the cost. If necessary, the model can be ordered online directly from the manufacturer's website. Allows you to identify imbalances in minivans, motorcycles and cars. The operator's work is simplified as much as possible due to built-in programs that independently work with weights on the tire. All relevant information is displayed on the LED backlit panel. The disc is shown in section, after which the system independently determines the plane of placement of the balances.

Cost: 220,000 rubles.

• build quality;
• the speed of performing the necessary manipulations;
• time-tested product from a well-known brand;
• sensors are responsible for reading data;
• standard body color;
• processing tires weighing up to 75 kg;
• if necessary, you can purchase auxiliary stands designed for wheels of larger diameter and size;
• reinforced rotation drive;
• the ability to engage four wheels at the same time;
• three types of cargo.

• not identified.

John Bean B9200

The perfect solution for small businesses and small workshops that have just started their journey to universal acceptance. According to most experts, such a purchase is an essential step towards success and high income. The design allows you to carry out the necessary manipulations in a short time period, without much labor loss.

Price - 430,000 rubles.

• comfortable placement of weights and other balances;
• convenient display on which the necessary information is displayed;
• application of VPI technology (virtual planes);
• after measurements, the system turns on the brake;
• hidden placement of weights;
• identifying the exact location of the problem;
• semi-automatic measurement of diameter and insertion;
• ergonomics;
• equipment;
• there is no need to purchase lifting equipment;
• mobility.

• manual drive of tire rotation.

HOFMANN GEODYNA 7600L

A frequent visitor to tire changers, city service stations and dealerships with a high and medium volume of daily work. The perfect solution for servicing motorcycles, SUVs, vans, small trucks and passenger cars. The system independently makes a preliminary selection from the list of available modes. Backlighting is used to simplify information entry and setting balances The monitor is built-in, touch-type, with a user-friendly graphical interface.

Price - 468,000 rubles.

• convenient tire mounting;
• start-stop (short cycle);
• accelerated processing time;
• VPM technology;
• a wide choice of programs;
• balancing cover;
• the rim is equipped with lighting for easy cleaning;
• EasyALU function;
• Smart Sonar;
• fast data entry;
• accuracy of measurements and problem area;
• touch monitor.

• not identified.

Hunter GSP9700 with Road Force Measurement

A balancing stand, which contains all the necessary characteristics and functional features that really high-quality balancing stands should have. Both lateral and radial impacts on the disc are measured, after which the system issues recommendations for solving the indicated problem. Such aspects may concern both the undercarriage of the machine and other key elements for which conventional equipment may not be enough to fix the problem. It is considered to be the best equipment for determining tire slip forces, measuring baselines, balancing quality, loaded runout and radial forces.

Price - 1,018,000 rubles.

• Wheel Countering Check option;
• after pressing the pedal, information is instantly transmitted;
• Split Weight mode;
• laser pointer;
• Split Spoke mode;
• stability of tires on the machine.

• not identified.

HOFMANN geodyna 9000P

The installation is used in professional workshops, service stations and dealerships, in which an endless stream of customers. The system first checks the level of the tire fit and its correct position on the rim. The axial and radial runout of the tire and rims is also measured. The system checks the tread pattern, which is then displayed on the screen. The set contains auxiliary clamps of an electromechanical type. The screen is wide, built-in and color.

Price - 1,250,000 rubles.

• the ability to manually adjust the geometric fit and ride smoothness;
• contactless input of necessary information;
• VPM technology;
• checking axial runout and radial tire and rim;
• the correct fit of the tire is checked by the system;
• search for side element damage;
• search for flat wear;
• easy to use program;
• the ability to use equipment without prior training;
• numerous programs and settings;
• color and wide monitor;
• clamping fixture set;
• diagnostics (data) are saved automatically;
• printout of measurements;
• the degree of tire wear.

• absent.

Conclusion

In the process of choosing the equipment so necessary for the workshop, a balance should be found between the quality and cost of the proposed product. Which model is preferable to purchase for a small or newly opened enterprise? The range of such products is extensive. In addition to the cost of the machine, it will not be superfluous to get acquainted with the numerous customer reviews or find out which design is in high demand in the modern market.

At the start, almost no one has sufficient financial capabilities, but it should be noted that without high-quality balancing equipment, no service center can function.Perhaps you should purchase a model of a high price category, which will expand the range of services offered by the service and recoup the costs of purchasing it in the near future. Good luck in your endeavors!