The best swimming pool tarpaulins and mats in 2020

Summer, hot rays of the sun, warm wind and hot air. At such a time, you really want to swim, but there may not be any nearby reservoirs or they are completely unsuitable for swimming. Here "the pool comes to the rescue", where you can cool down and swim to your heart's content. However, the pool requires special attention, namely: the surface on which the "water tank" stands must be flat and covered with a special mat, and a "cape" is required outside so that the water does not turn green and leaves and dirt do not get into it.

You need to decide what kind of pool you have, because for each category specific tents with bedding are provided.

Pool types

• Stationary - the most durable and durable type. The frame itself is in a kind of concrete sarcophagus. Construction and further maintenance are not cheap at all, and they are not suitable for everyone due to their large dimensions.
• Inflatable - they are also called portable, since they are very easy to carry from one place to another. However, this design is not enough for long. Firstly, the walls themselves are soft, without support - one awkward movement and the flood is guaranteed. Secondly, a careful attitude towards this species is required (it is especially important to ensure that the stones do not fall under the bottom). But the democratic cost cannot but please summer residents.
• Frame is the most convenient and popular type. It is distinguished by its special strength, as well as the fact that it can be transferred, like an inflatable, but only the material is stronger.

Litter, as one could understand, is needed only for inflatable and frame pools. Awnings are required for all types. Let's consider their main categories.

Types of awnings

• Air bubble film - consists of 2 layers (bubbles and a layer of polyethylene). It is a favorite with many summer residents because of its versatility, durability, ease of use. It also helps to keep the water warm.
• PVC - reinforcing mesh with a polyvinyl chloride coating, which is covered with varnish (Teflon or acrylic) on top. It is difficult to pull such an awning over the bowl on your own, and the material is capricious in storage.
• Louver coating - consists of solid polyvinyl chloride and is much safer than other coatings. Ease of use is also present;
• Polypropylene laminated fabric - durable and waterproof. The main advantage is the low cost.

Let's move on to our ranking of the best mats and tents for each type of pool separately.

TOP-8 of the best awnings and bedding for frame pools

Intex 28031

The product is UV resistant. The manufacturer has provided drain holes to prevent water accumulation.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Intex Development Company Limited
Colour	blue
Material	Pvc
average price	RUB 1000

• convenient to pull;
• does not fade in the sun;
• elastic;
• affordable cost;
• copes with its function.

• due to the fineness of the material, it may tear;
• there is an unpleasant smell after purchase.

On the sides, the cover is fixed with a strong cord, which is passed along the entire perimeter of the "bedspread".

Bestway 58037

The coating will help maintain the temperature of the water and prevent evaporation.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Bestway Inflatables & Material Corp
Colour	blue
Material	polypropylene laminated fabric
average price	RUB 670

• low cost;
• not capricious in storage;
• convenient to use;
• durable;
• elasticity;
• high strength.

• additional help is required when pulling;
• the lace is pulled out quickly.

If you use the awning on an ongoing basis, it will help to isolate yourself from unnecessary work on cleaning the water from pollution.

Intex 28039

Full protection from UV rays, foreign objects, debris, insects, evaporation.

Parameters	Characteristic
The form	rectangle
A type	tension
Manufacturer	Intex Development Company Limited
Colour	blue
Material	Pvc
average price	1027 RUB

• high strength;
• durable;
• the qualitative composition of the goods;
• It does not require special care;
• copes well with the task;
• easy to stretch.

• expensive.

Drain holes help keep water out. On the sides there is a strong cord for attaching the "bedspread" to the bowl.

Intex 28041

It is fixed on the bowl with a special strong rope tie. The holes relieve the coating from unnecessary stress on the frame. The awning keeps the water clean and dust-free.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Intex Development Company Limited
Colour	Gray
Material	Pvc
average price	RUB 5,000

• attractive appearance;
• dense;
• not picky about storage;
• easy to fix with the frame;
• folds easily.

• not found.

The manufacturer declares that the product can be used all year round and is completely resistant to external mechanical influences.

Bestway 58220

Protects the bottom of the bowl from friction and abrasion. The use of such a product is only a joy.

Parameters	Characteristic
The form	square
Material	Pvc
Manufacturer	Bestway Inflatables & Material Corp
Length	50 cm
Width	50 cm
average price	1200 RUB

• high quality coating composition;
• lasting;
• durability;
• does not break;
• does not get dirty.

• thin.

The manufacturer guarantees the density and durability - small stones, sharp particles, sticks are not a hindrance at all, but it is only important that the surface is even, without holes.

Intex 28048

The wear of the bottom of the bowl is reduced thanks to such a high-quality bedding, but you need to understand that the coating itself is thin, so you should not expect the effect of a soft pillow.

Parameters	Characteristic
The form	square
Manufacturer	Intex Development Company Limited
Length	472 cm
Width	472 cm
average price	RUB 1000

• retains water that splashes out of the pool;
• significantly increases the service life;
• good, durable polypropylene;
• large area (any diameter will do);
• dense.

• not found.

Before installing the pool, it is necessary to level the surface so as not to create additional interference with the coating. The mat removes any dirt from your feet, so the water stays cleaner for longer.

Bestway 58265

The bright color of the coating attracts the eye and gives even more "green" to the garden.

Parameters	Characteristic
The form	square
Manufacturer	Bestway Inflatables & Material Corp
Length	81 cm
Width	81 cm
average price	1700 RUB

• dense;
• does not break;
• long service life;
• durable polyethylene.

• not found.

Additional docking between the ground and the bottom of the bowl is provided by soft modular protection.

Bestway 58100

Small imperfections on the ground will be hidden by two-layer polyethylene. Even if a few pebbles fall under it, it will not harm the frame in any way, but stepping with your foot, you cannot avoid pain.

Parameters	Characteristic
The form	rectangle
Manufacturer	Bestway Inflatables & Material Corp
Length	295 cm
Width	206 cm
average price	RUB 510

• reliable;
• hard;
• pleasant to the touch surface;
• easy care;
• non-staining material.

• not found.

It's a pleasure to walk barefoot on such a mat. If a little dirt appears, it will not be so difficult to clean everything due to the smooth, dirt-repellent surface.

It would seem, why does a frame pool need a litter, because the bottom is already strong, hard, however, in order to extend the service life, you still need to purchase such a thing.

TOP 8 best tents and bedding for inflatable pools

Intex 28020

The “blanket” is securely fixed on the inflatable ring using a special rope.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Intex Development Company Limited
Colour	blue
Material	Pvc
average price	RUB 500

• high quality;
• dense;
• does not pass debris and dirt;
• cheap;
• water does not bloom.

• if pulled tight, it will tear.

Durable and sturdy cover does not sag above the water under the weight of rainwater.

Intex 58412

Reliable protection of the pool from leaves, dust and dirt. Does not blow away with the wind.

Parameters	Characteristic
The form	rectangle
A type	tension
Manufacturer	Intex Development Company Limited
Colour	the black
Material	Pvc
average price	RUB 690

• tightly fixed;
• does not sag;
• durable.

• not found.

The product is practical and easy to use. Does not cause problems when pulling on the inflatable ring.

Bestway 58060

The peculiarity of the coating is that it does not need to be attached to the sides. It is enough just to put it on the water surface.

Parameters	Characteristic
The form	round
A type	floating bedspread
Manufacturer	Intex Development Company Limited
Colour	blue
Material	airy pimple film
average price	RUB 700

• keeps warm well;
• heats water;
• saves from dirt;
• protects from sunlight;
• does not fade in the sun.

• not found.

According to buyers, this is the best "cover" for the water surface: it does not transmit ultraviolet rays (does not evaporate bleach and water), keeps the water warm for a long time and even heats it up.

Intex 28023

There are drainage holes along the entire perimeter of the polyethylene, which signal a large accumulation of rain.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Intex Development Company Limited
Colour	blue
Material	Pvc
average price	RUB 1,500

• attractive appearance;
• easy to store;
• easy to attach to the inflatable ring;
• long service life;
• strong hold.

• not found.

Polyethylene is resistant to various mechanical influences. It is difficult to break when pulled or accidentally pulled.

Bestway 58003

For uneven surfaces, the best solution. Strong, dense, but at the same time almost not felt if you step on with bare feet.

Parameters	Characteristic
The form	square
Manufacturer	Bestway Inflatables & Material Corp
Length	488 cm
Width	488 cm
average price	1350 RUB

• stylish appearance;
• smooth surface;
• strength;
• elasticity.

• not found.

Extends the service life of the suburban pool. In addition, the litter itself is of high quality, so you don't have to buy a new one for every season.

Intex 29081

The puzzle mat provides reliable protection of the bottom from debris, stones and branches.

Parameters	Characteristic
The form	square
Manufacturer	Intex Development Company Limited
Length	50 cm
Width	50 cm
average price	1800 RUB

• high strength;
• ease of use.

• affordable cost.

The modular bedding is suitable for an inflatable pool: levels the surface of the ground and prevents the bottom from chafing.

Intex 10760

The manufacturer claims that the bedding is durable, repels moisture and dirt, and is easy to clean.

Parameters	Characteristic
The form	square
Manufacturer	Intex Development Company Limited
Length	106 cm
Width	58 cm
average price	RUB 1000

• high strength;
• elasticity;
• does not bully.

• not found.

This model is completely unpretentious in use, does not require special conditions for storage and operation.

Bestway 58461

The cover protects the pool from mechanical damage.

Parameters	Characteristic
The form	a circle
Manufacturer	Bestway Inflatables & Material Corp
Diameter	211 cm
average price	RUB 900

• stylish appearance;
• relatively soft;
• does not fade in the sun.

• not found.

The unusual color of the litter will brighten the garden and add a little brightness.

Inflatable pools are practical, but their operation requires special rules, so you need to be as responsible as possible in the choice of awnings and flooring.

TOP 4 best tents for stationary pools

Summer fun

The manufacturer guarantees the quality of the goods. The water in the pool is reliably protected by durable and high-quality material.

Parameters	Characteristic
The form	oval
A type	tension
Manufacturer	Watermann
Colour	blue
Material	Pvc
average price	RUB 1,500

• dense;
• attaches well;
• easy to fix.

• not found.

Buyers note that it is a pleasure to use such a “blanket”.

COMPOSIT GROUP TZ68

The covering is suitable for stationary pools both outdoors and under the roof. Durability does not weaken even in strong winds.

Parameters	Characteristic
The form	oval
A type	tension
Manufacturer	COMPOSIT GROUP
Colour	brown
Material	Pvc
average price	RUB 5,000

• attractive appearance;
• elastic;
• soft;
• lasting.

• not found.

It is very important that the awning fits exactly in size, since if the frame is smaller, then there will be nothing to attach the cord to.

Bestway 58292

The awning is firmly attached to the bowl itself, so the likelihood of dirt getting into the water is very small.

Parameters	Characteristic
The form	round
A type	tension
Manufacturer	Bestway Inflatables & Material Corp
Colour	Gray
Material	Pvc
average price	RUB 5,000

• resistant to mechanical stress;
• does not break;
• dense;
• durable.

• not found.

The water under such an awning will not cool quickly.

DEL slats

A coiling device that is very practical to use.

Parameters	Characteristic
The form	rectangle
A type	tension
Manufacturer	Intex Development Company Limited
Colour	white
Material	Pvc
average price	RUB 20,752

• convenient use;
• increased resistance to high temperatures;
• anti-UV coating;
• unusual appearance.

• difficult to clean.

The jalousie coating will become an additional decoration, since it is not just a film lying on the surface of the water, but graceful jalousies that cover the water surface.

For a stationary pool, you only need an awning so that dirt and dust do not get into the water when no one is swimming.

What to look for when choosing?

1. What kind of pool this or that product belongs to. For a stationary one, for example, the awnings can be attached directly to the base of the pool itself, that is, you will not have to remove and attach it again every time, but for an inflatable one there are no such awnings.
2. Sizes so that the awning is fully sized for the bowl.
3. The quality of the material.

The rating includes mainly the same manufacturers, since their product is very popular on the market. Other companies, if they offer tents or bedding, are in limited quantities, and you can not buy them in all online stores.