The best soldering irons for polypropylene pipes in 2020

In modern realities, apartments, country houses, various buildings are increasingly equipped not with metal pipes, but with polypropylene pipes. This thermoplastic polymer is in demand due to its relative cheapness and elementary assembly. There will be no problems with cutting plastic, after all, it is not metal, but you will need to purchase a soldering iron to connect pipe sections.

A certain care is required in the work, since if the propylene pipes are overheated, it will be a nuisance. Excessive filling of material forms inside the pipe, which means that the required hole will be blocked. To check if everything went smoothly, when the seam has completely cooled down, pass water through the structure.

Soldering iron working principle

The heating tool for PVC pipes is popularly nicknamed the iron, and all due to the fact that the principles of work are similar. The soldering iron heats up to a high level of 260 - 300 ° C. Due to heating, the matrix located on both sides of the device, they are also nozzles, glowing. Using one nozzle, the outer parts of the pipe are melted. The other helps to warm up the inside. Thanks to the soldering iron, both elements are held, after which a high-quality docking takes place. The hardening is very strong and unbreakable.

To make it easier to work with workpieces, the tool is fixed on a stand located on the worktable, and soldering is started. But there are situations when it is impossible to prepare a workplace and you have to solder by removing the tool from the support. To avoid burns on the heating element, hold the device by the handle.

The purpose of installing polypropylene pipes is quite simple, you just need to tightly connect the heated elements to each other. With the right tool, this task will be completed quickly and intelligently.

How to choose a tool

Having decided to purchase an apparatus for soldering polypropylene pipes, you immediately face two questions: "Which one is better to buy?" and "How to determine the selection criteria?"

Below are the most important technical characteristics that you should rely on when buying a device.

1. Power. Based on this factor, soldering irons can be divided into two types. The first type is those devices whose power is up to 1000 watts. They usually have one heating element and, accordingly, are inferior to the second type of devices, in which the power reaches 2000 W. There are two heating elements in such instruments. If a soldering iron is required for professional activities, then, of course, it is advisable not to save money and choose a model with high power.If the tool is purchased for home purposes, then a device where the heating element is one will do.
2. Soldering diameter. Quite an important parameter, since based on it, it will be clear which pipe diameter is suitable for connecting with a soldering iron, and which one is not. Typically, the diameter of the brazing depends on the pipe nozzles. It is good when many matrices are attached, thereby increasing the scope.
3. Heating temperature. The maximum value of the temperature regime ranges from 260 to 300 ° C. When purchasing a soldering tool, you need to pay attention not only to this characteristic, but also to such an important point as the presence of temperature control. After all, sometimes you need to adjust to the pipe material.
4. Control elements. Additional functionality in the form of various controls will not be superfluous. For example, a light indication is useful, with which you can control the heating. Also, a built-in thermostat will play a good service, thanks to which it is possible to maintain heating without problems during operation, and based on the temperature of the working part, turn on or off the heating element.

Top manufacturers

Having dealt with the selection criteria, you are puzzled by a new question: "Which company is better?" A variety of brands and pricing policy reigns supreme in the modern market. If you have a desire to buy a branded item, then you should take a closer look at such manufacturers:

Rothenberger is a well-known European company that produces high-quality products for all kinds of repair work. The products are popular with the pros of their craft;

Gerat is another professional brand that captivates not only with its quality, but also with its affordability.

In addition to these brands, the tools of such companies as CANDAN, ENKOR, RESANTA and other slightly less well-known manufacturers received deserved love.

Rating of the best soldering irons for polypropylene pipes

10. Soldering iron for pipes Candan cm-03

The tenth place in the ranking of quality welding tools is taken by the Candan cm-03 model. This device has won the love of customers, thanks to its simplicity, ease of use and affordable price. Its purpose is to weld pipes with a diameter of 20 to 63 mm. The heating element has a xiphoid shape. Two welding nozzles can be installed on it at once. The power of the tool reaches 1500 W, and the heating cable can withstand as much as 400 ° C. The tool is equipped with a fixed stand and clamp, which allows it to work in a wide variety of conditions.

The average price is about 3000 rubles.

Video feedback about the device:

• The model has a thermostat;
• The switches are equipped with a special indicator;
• The complete set includes various attachments, scissors and a measuring tape;
• Compact, does not take up much space.

• Consumes a lot of electricity;
• More suitable for home use than professional;
• Weak.

9. Welding machine for polypropylene pipes ENKOR ASP-1500 / 20-63

ENKOR ASP-1500 / 20-63 perfectly suits for home use, moreover, even a novice plumber can handle this device quite well. The priority task of this tool is a high-quality connection of polypropylene pipes. The power is 1500 watts. There are two heating modes. Welding diameters range from 20 mm to 63 mm. Three nozzles can be attached to the heating element, which saves time. The device heats up at 300 ° C and this is enough to ensure a flawless grip.

The cost is approximately 2700 rubles.

Demonstration of device operation - in the video:

• Convenient control system;
• Moderate dimensions;
• The presence of a case;
• There is a stand.

• Very weak thermostat.

8. Apparatus for welding polypropylene pipes Elitech ct 1000

The Elitech spt 1000 model enjoys a well-deserved popularity.Thanks to this device, the welding is perfect, butt-to-joint. There is no need to worry about any damage or leaks in the seam area. Although the power is small, only 1000 W, the instrument is suitable for both amateurs and professionals. Working temperature from 50 to 300 ° С. Together with the case, the product weighs 2.65 kg. Number of attachments supplied 4.

The average price is 1800 rubles.

• Fast and powerful heating;
• Compact dimensions;
• Suitcase included;
• Maintains temperature well.

• To place the device in the case, the attachments must be removed.

7. Apparatus for welding polypropylene pipes Wester DWM 1500

The Wester DWM 1500 model has decent functionality and does an excellent job of melting plastic. The power consumption is 1500 W, and the heating of the operating temperature reaches the limit of 300 ° C. The package, in addition to the device itself, includes six attachments and a number of necessary tools: a screwdriver, a hex key, a three-meter tape measure, a pipe cutter. The weight of the device is small 1290 grams.

The average price is 3800 rubles.

Video review of the device:

• Heating is fast;
• Smelting plastic is easy, without difficulty;
• A choice of nozzles is available;
• Successful equipment.

• Not quite stable stand;
• You need to get used to the buttons.

6. Machine for welding plastic pipes Elitech ct 800

Another successful model of a soldering iron from Elitech is the spt 800. This welding tool has an affordable price and will be of interest to both professionals and ordinary home craftsmen. Power consumption 800 watts. There is a built-in thermostat. A set of nozzles is included in the package. For ease of use, the tool is supplied with a metal case.

The price is about 1600 rubles.

• Excellent case and generous bundle;
• Relatively inexpensive;
• Heating up in 4 minutes;
• Easy to manage.

• You have to press the stand with your foot;
• Teflon peels off the nozzles over time.

5. Soldering iron for polypropylene pipes SPETS PTP-1000 SPETS-3268

Of inexpensive soldering tools, the model SPETS PTP-1000 SPETS-3268 has proven itself well. The complete set includes a stand, nozzles, a screwdriver, a key needed to change nozzles and an instruction, which clearly describes how the device is used. The power is small 980 watts. There is a temperature controller.

The price is about 1800 rubles.

• Affordable for the price;
• Good quality tips;
• The presence of a case.

• Flimsy case.

4. Apparatus for welding PVC pipes Prorab 6405-k

This soldering iron has an enviable power of 2000 W and at the same time its cost is by no means exorbitant. There are two heating modes and a temperature controller. The package is decent, in addition to six attachments and a stand, there are scissors and a tape measure. The metal case is sturdy enough. The device heats up quickly, thanks to its power, it is possible to work in windy conditions.

The price is about 2000 rubles.

• Low cost;
• Decent functionality;
• The choice of nozzle is present.

• Difficult to find on sale.

3. Soldering iron BRIMA TG-171 0010291

Of the relatively inexpensive and high-quality welding machines, the BRIMA TG-171 0010291 soldering iron has proven itself well. The power of this model is low, only 750 W, but it is very easy to use and is not inferior in quality to more expensive tools. Warming up is fast and the adhesion of the pipes is strong. The package is standard. The temperature regulator is present.

The price is about 4000 rubles.

• Good equipment;
• 6 double-sided inserts;
• 2 indication lamps;
• ease of use.

• The stand is poor.

2. Soldering iron Gerat Weld 75-110 69110

The second place is occupied by the manual welding machine Gerat Weld 75-110 69110. There are two elements in the heater. One of the TENs is reserved. Power of the tool is 1600 W. The functionality includes a thermostat.The set includes a beautiful metal case. There are several nozzles.

The price is approximately 4700 rubles.

• Reliability;
• Excellent functionality;
• High power.

• Expensive.

1. Gas soldering iron Dremel Versatip 2000-6

In the first place is the Dremel Versatip 2000-6 universal gas apparatus, which brilliantly copes with a number of tasks: melts, solders, cuts, burns out and even removes paint. For its versatility, the tool has earned the love of both professionals and ordinary buyers. The device operates on liquid gas (butane). You can choose different temperature modes. Heating occurs within a few seconds. Melting and cutting plastic is fast.

The price is 2700 rubles.

Device overview - in the video:

• Build quality;
• Instant warm-up;
• There are more than enough attachments;
• No wires and compactness.

• Requires caution in work;
• It can burn with air during operation.

Conclusion

A soldering iron for polypropylene pipes will be needed in every home, because sooner or later, but there comes a situation when you need to repair the heating system or start arranging the water supply system. There is a huge variety of products on the market, in stores, on Internet sites. The article will help you navigate this abundance, but do not forget to study the characteristics of the product you like, noting the important for yourself and filtering out the insignificant.